Robot Programming Questions and ARC Help
Get help with ARC scripts, Robot Skills, hardware connections and robot behavior. Browse questions and answers from the Synthiam community.
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
I Make Robots Crew Socks
Autonomous AI
Autonomous AI robot skill with vision, speech, movement, animations, and self-directed task...
Azure Text To Speech
Azure Text-to-Speech for ARC: generate natural-sounding robot speech with Microsoft Azure voices,...
Exosphere
Telepresence and remote control for any robot with human-assisted tasks, video, audio, and AI...
Azure Speech Synthes…
Microsoft Azure neural text-to-speech for ARCx scripts and skills, with multilingual voices, SSML...
Rtk Gps
RTK GPS rover/base skill with NTRIP corrections, cm-level pose, heading support, map fusion, and NMS...
Outdoor Navigator
GPS-driven outdoor robot navigation with satellite maps, saved waypoints, zones, no-go areas,...
Voice menu tree to navigate options and run scripts on ARC robots. Multi-level, customizable prompts, speech I/O, timeout and repeat/back.
Sharp Gp2d12 Sensor
I'm having a blast with my EZ-Robot kit. I need to know how to hook up the Sharp GP2D12 sensor to the EZ board. I mounted this sensor at the bottom of my Wall-e pointing to the floor. My grandson lives in a two story house and I haven't taught Wall-e to climb or go down stairs yet (yea right), so this is to prevent him from doing so. As he...
0
2 k
Omnibot Price?
Hi, I recently won an auction for a omnibot 5402 (robot only). I thought it was cheap because it was only $52. Then i found out shipping to the Netherlands was $62 and i still thought it was...
10
9 k
Metal Claws
FYI - I found aluminum servo actuated claws at Sparkfun for 10 bucks. They are good looking and a nice size. Will be going on my omnibot very soon.
12
5 k
Help! I Can't Get Y Camera To Work
I have the EZ camera and hooked it up just as described. My computer uploaded the drivers when I plugged in the dongle and it shows up in the dropdown...
23
5 k
Dutch Meetup
Hey, How many of you are dutch? i noticed Pab!o,Okidey, and budel0 are from the Netherlands I think we should do a meeting and show our bots sometime. I was thinking of Maker Faire 050, Since last year's mf050 was a big success. Now they are organizing another one on may 12th 2012. What do you think?
1
3 k
Ez-Robot Camera Casing
hi, this may be a dumb question but Any tips on how to remove the Ez-Robot camera out of its casing? the video makes it look way too easy ha ha ha ...... do I need to heat up...
6
3 k
Ez-Con
I think we need to stage an EZ-Con where everyone brings their robots and we get to meet DJ and his staff. Maybe get some vendors to sponsor who can set up their tables and sell stuff that DJ doesn't carry....
22
5 k
Adjusting Th X Axis On Gamepad Joystick
Greetings, I have the EZ-B controller and a wireless xbox controller, Im using the left joystick to control a pittman motor by using a Syren10...
5
4 k
Hall Effect Sensor
Hello, Does anyone know how to use a hall effect sensor with the EZ-B? I had planned to use one to locate a position for a modified servo however I hooked it up to an ADC port but I...
12
5 k
Continuous Rotation Servo Specs
Hey I was playing around looking for more info but was unsuccessful. What's the torque rating at 6 volts and can these servos have multiple exact positions?...
5
4 k
Ez-B V3 Board.. 2Layers?
Is the EZ-B board a two layer board or a multilayer board? I think I need to cut the corners off to fit it in a project i'm working on. I'm worried that I may short out any layers that may between the top & bottom. Probably have to remove the power jack and relocate the Blue led, but it should be do-able. Looks to be two layer! drwass2
13
3 k
Ez Script Servospeed Command Broken?
Using ServoSpeed(D#, 50) or any value between 0 and 50 isn't having any affect on the speed of my servos. I have tried grouping all of the ServoSpeed() commands at the top of my script and using them right before each Servo() command without any change. I am using a mix of the Hitec analog/digital and the Futaba 3003 (included in the ez-b kit)...
6
2 k