Robot Building Questions
Synthiam Credit
Log In
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Synthiam Swag
See All Swag
Robot Sticker
Recent Robot Skills
View All
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Control Feetech serial-bus servos via EZB UART or PC COM, mapping servo IDs to ARC virtual ports; supports position, speed, release, acceleration.
Featured
15 DOF humanoid robot built from a budget eBay kit using MG995 servos, EZ-B head control and Castle 10A regulator; power upgrades planned.
question
Pan/Tilt For Camera Or Sensor
I don't understand how it works. If you attach the camera, does it let you rotate the camera up and down and side to side?
8
3 k
rkalter19 |
question
Camera Tracking And Robot Following Question
I am in ARC and using only the Camera and Modified Servo Movement Panel controls. The camera/horizontal_servo does a fine job of...
13
4 k
dicka |
question
Keyboard Control Not Working Until Config
I really like how DJ has provided so many ways to interact with our robots like VR, Camera and keyboard..did I miss any others?...anyways ,I have found that the Keyboard Script with a letter and command will not work after opening your EZBfile until its "config and save"(without any edits) .Would there be a way to have a Start button to...
3
2 k
irobot58 |
question
Python, Basic And C
Here's An Idea, Add Python To Basic And C In Scripts. Don't know if this is doable or not. Just a thought.
1
3 k
robotmaker |
question
Found A Nice Small Table Saw For Cutting Plastics
i bought one large table saw with a special cutting blade for cutting plastics,blade a little high cost ,but does a super...
1
3 k
robotmaker |
question
Spotty Speech Recognition In ARC
Sometimes speech recognition works on my system and sometimes it will not work at all. Also, it may work a while and them stop in the same session. I'd like to know if anyone has delt with this and if there is a solution or any pointers. I can see that the mic is picking up my voice by the bar chart moving when I talk. But, at times there is no...
3
3 k
irobot58 |
question
Activating A Switch
Hi All. I'm working on making a full sized Dr. Who K-9 robot and need some help on how to activate a couple things with the EZ-b. It's going to have a laser pointer in the nose, and...
10
4 k
Dave Schulpius |
question
Baffling Movement Control Question
I have a project I'm working on (encl.) with a movement panel to control the treads. When you press the forward arrow, only one servo turns, the other does a momentary movement, then freezes. Whether executing a call to the movement control from script or manually, it doesn't seem matter, same result. However, if I create a fresh project, set up...
6
2 k
cyberdude |
question
Say Command
Any insight into why my computer won't "say" anything when I invoke this command? Audio otherwise plays fine from computer. Thanks.
2
2 k
cyberdude |
question
Benq S6 4.8 Inch Touchscreen W Usb And Bluetooth
Im seeing lots of these on ebay . Anyone have one running xp or win 7 ? Though t on if this guy could run ARC and one cam? I know other members bought this to try out.
0
2 k
jstarne1 |
question
Vexplorer Tread Kit
Is anyone familiar with the Vexplorer Tread Kit? I have one that I was thinking of upgrading my omnibot with, but wasn't sure if it would take the weight. Keep in mind it will have a larger battery (12V) and two guns for arms. So there will be a slight weight increase over the original weight. Any input would be greatly appreciated. Thank you,
3
2 k
robotmaker |
question
2 Actions At Once
Hi All. Could someone walk me through how I'd activate 2 things with one voice command? I need my robot to turn on it's laser pointer and make a zapping noise (I plan to use a sparkfun MP3 trigger) at the same time. Similarly, I'd like to have it move it's ears when "listening" to the voice command and then respond with a movement or MP3...
1
2 k
Dave Schulpius |