Robot Programming Questions and ARC Help
Get help with ARC scripts, Robot Skills, hardware connections and robot behavior. Browse questions and answers from the Synthiam community.
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
"I build robots" Hoodie
Autonomous AI
Autonomous AI robot skill with vision, speech, movement, animations, and self-directed task...
Azure Text To Speech
Azure Text-to-Speech for ARC: generate natural-sounding robot speech with Microsoft Azure voices,...
Exosphere
Telepresence and remote control for any robot with human-assisted tasks, video, audio, and AI...
Azure Speech Synthes…
Microsoft Azure neural text-to-speech for ARCx scripts and skills, with multilingual voices, SSML...
Rtk Gps
RTK GPS rover/base skill with NTRIP corrections, cm-level pose, heading support, map fusion, and NMS...
Outdoor Navigator
GPS-driven outdoor robot navigation with satellite maps, saved waypoints, zones, no-go areas,...
TCP video server for Unity clients to stream camera video and send servo positions to ARC for remote robot control
Can I Delete My Post?
How do you delete post on here?
6
2 k
Does EZ-B Make A Loud Alarm Sound?
I was checking out hooking my bluetooth up to my laptop, I left the room and the ez robot was still plugged in but not connected to bluetooth, all of a sudden , this loud alarm went off and at first I didn't know what it was, but I will tell you, It was ear piecring and I was in the next room, is that a low battery voltage alarm? Because when I...
7
2 k
Has The Mini Ezb Board Been Canceled
DJ it looks like very good design to have a tiny board in side small robots.
18
4 k
Using Ez_B To Throw A Switch
Hi Hardware, I'm going to get my roboquad working by triggering the switches on the remote, and having the IR LED in the remote taped directly to the robot's IR sensor. I need the ez-b to emulate pressing of switches on the remote. I've checked the voltage across each switch and it's tiny, only 0.06V. I don't know how much current goes through...
7
3 k
Lcd
Hello everyone, I have another question. I have this neat little serial 2x8 lcd screen. Its got this rs-232 port with a gnd, 5v, and rx pin. I think I have this lcd connected accordingly. gnd on gnd pin, 5v on...
9
4 k
Additional Hardware Help
I'm just wondering if anyone knows if these can be connected to the ezb board: https://www.robot-electronics.co.uk/htm/tsa01.htm https://proto-pic.co.uk/tmp36-temperature-sensor/ https://www.robot-electronics.co.uk/htm/cmps3tech.htm https://www.robot-electronics.co.uk/datasheets/uCAM-DS-rev4.pdf...
7
2 k
Radar Scan/Ping Sensor
I watched the video tutorial of Dj on the radar scan and how to hook it up, I noticed he said always remember, negative is always in the center, did he make a mistake when he...
14
4 k
How Can I Use Multiple Modified Servos?
I have two kits I am trying to run all four continuous servos Only can get two to run
8
3 k
How Do I Use Ping Radar Control?
I must have a bad board, I cant get the radar to work or the ping sensor to work, i've tried different ports and to no avail. That bums me out cause everything else works, what do I do?
5
3 k
Scripting
Hello, I've been working on my EZ BoxBot from the tutorials, and have gotten all the way through the videos. However, the tutorials stop after showing how to make the wheels work, and so my robot can't move its head or arms at the moment. I've been trying to set those up, but I'm unsure of what I should be doing. I tried clicking on both...
2
2 k
Where Can I Find Larger Servo Wheels?
Where does one get bigger wheels The ones that come with the kit are real small really limits your build
1
2 k
Hi All, First Post And Few Questions
Hey everyone, I need to build an autonomous robot that would serve the function of a mini fork lift. I have researched lot of kits/options and have decided to go with EZ-Robot. I been lurking on the forum for last week or so and the live and helpful community is one of the primary reasons I have decided to choose EZ-Robot I am currently trying to...
10
3 k