Robot Programming Questions and ARC Help
Get help with ARC scripts, Robot Skills, hardware connections and robot behavior. Browse questions and answers from the Synthiam community.
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
"I build robots" Hoodie
Autonomous AI
Autonomous AI robot skill with vision, speech, movement, animations, and self-directed task...
Azure Text To Speech
Azure Text-to-Speech for ARC: generate natural-sounding robot speech with Microsoft Azure voices,...
Exosphere
Telepresence and remote control for any robot with human-assisted tasks, video, audio, and AI...
Azure Speech Synthes…
Microsoft Azure neural text-to-speech for ARCx scripts and skills, with multilingual voices, SSML...
Rtk Gps
RTK GPS rover/base skill with NTRIP corrections, cm-level pose, heading support, map fusion, and NMS...
Outdoor Navigator
GPS-driven outdoor robot navigation with satellite maps, saved waypoints, zones, no-go areas,...
Tiny YOLOv3 CPU-only real-time object detection using a camera; offline detection, script-triggered on-changes or on-demand results with...
Vb And Servospeed
Hi, I use this line of code: EzB_Connect1.EZB.Servo.SetServoPosition(EZ_B.Servo.ServoPortEnum.D9, 60, 10) to control a servo. The last integer '10' is the speed setting. However this has no effect at all on the servo speed. I can use 1, 50, 100 etc... it makes no difference. I tried this with Windows XP with VB2005 and with Windows 7 with VB2008....
2
3 k
Ezb Serial Communication With The Vex Cortex
So I realize this is probably a long shot, but I am hoping one of you C programmers can help me... The Vex cortex micro controller would serve me well as a low level sensor/bump and motor controller for my current project... What I want to do is use my EZB4 to communicate with it over UART (since the vex cortex has 2 UART ports)... The wiring and...
0
3 k
Ping Ping Ping
Question for you guys..anyone. Other than object avoidance, is there anything else a ping is good for in association with EZB?
43
9 k
Software Item Request
A couple of us have been tossing around the idea of some sort of speed ramp. Speaking for myself, I'd like to have one for servo. Now I think this would have to be done in auto position, only for the fact that you would need some form of time reference. Say something like speed 20 to 15 over 3 seconds then speed 15 to 8 over 5 seconds, then full on...
4
3 k
Does Anyone Of The Lucky Ones Want To Sell A V4
I do not want to wait until July for a v4, does anyone want to sell one, when they get it? I have a v3 and money.
7
3 k
Ar-Drone V.1 Navdata
Hi, i am trying to get the navdata out of the AR drone while tracking an object. i was able to retrieve th object position using the following script $filenamex = "c:\logx.txt" %create log for x coordinates% $filenamey = "c:\logy.txt" %create log for y coordinates% :START %retreive centroide position% IF ($CameraIsTracking =...
1
2 k
Ping_Wait
Is "Ping_Wait" command pause the script until the distance match the specified value?
4
3 k
Volts For Signal
the signal ports on the ez-b4 ,does that give volt?.when i see the tutorial from the leds, i see they are connected to gnd and to signal ports. blush
19
4 k
Dj Sures.Ez-Bits Need More Documentation!
I would like to see in one place a bill of materials for all the items required to be printed for JD, Rolli and 6. That way, I can queue...
2
3 k
Connect To Ar Drone From Script?
Hello EZ-robot people! I was searching the web for an ARC script command, that will enable me to connect to the AR Drone from within a script, but could not find how to do it. Any ideas? Thanks.
6
3 k
Ez-Robot Revolution In Complex Magazine!
I finally found the new April/May issue of Marc Ecko's Complex Magazine which features a full page of EZ-Robot goodness! Check it out:
3
3 k
Omnibot 5402 Head Movement
Hey guys. Ive been slowly working on one of these and I have come to a bit of a stand still. Im looking for the best way to get his head to move left and right without being to complex. So far ive seen maybe 3 different ways it was done. The only problem is 2 are only seen briefly in DJs omnibot v2 and v3 videos. While the 3rd is just more worl...
2
3 k