Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Add custom EZ-Script functions in C# or JS; intercept unknown calls, parse parameters and return values via AdditionalFunctionEvent.
Featured
Convert a Shark Steam Spray Mop into an EZ-Robot Steam Spray Mop-DIY robotics upgrade inspired by Team DJ
question
Updated Needed For Script Help
Small fix/correction suggested for the "Script Help". The Script Help states: IsConnected( boardIndex ) Returns TRUE or FALSE if the specified EZ-B board index is connected Example: $status = IsConnected(0) It does not appear to actually return a value of TRUE/FALSE it returns a value of 1/0, where 1 means connected and 0 represents...
3
3 k
DJ Sures |
question
Fish Tank Robot
This would be one of the most unique robots I have ever seen.....
16
5 k
Nomad 6R |
question
Power Options
Are there any other ways to power EZ-B besides the power shell? I am hoping for a cheaper smaller way for my humanoid robot.
7
3 k
CardboardHacke… |
question
Installation Questions
The MSI for the ARC is failing. I run the installation as administrator and get this error. Quote:The cabinet file 'Microsoft_VC120_CRT_x86.cab' required for this installation...
20
6 k
Nomad 6R |
question
Stl File Whithout Size?
i dont know iff its normal that stl files are whithout the sizes. i just send the stl files to the chop for printing jd chest but i need sizes. am confuse now.
7
4 k
Nomad 6R |
question
A.I Found On Kickstarter
Wow this is looking good. I hope it can later be incorporated into the robots I will be working on. The buy in price was so low i could not help but go ahead and support...
23
6 k
MovieMaker |
question
Pic Jd Backside
does any have a pic off jd backside whit ez-b4 in?
13
4 k
Nomad 6R |
question
Ez-B V3 Developers Kit
Does anyone know where I can purchase a EZ -b v3 developers kit?
12
4 k
asherphil |
question
Remember Clicling Sound Found It
i had a servo whit a clicking sound in it.there where more byers who has this sound. so i thought it was normal,till today when i connected all in the robot. power up the robi and there was smoke,lucky i had connected the on/off swits. the damage hopefully is only wires. now i have to wait a hole week for a wire from less then 1 gram 7 cm long...
2
2 k
Nomad 6R |
question
Ezb V4 Disconnect Question
Good Morning, Last night i was playing with my robot, and i think that it went out of wifi range. I could not stop my robot and it ran into a shelf and broke one of my...
6
3 k
kamaroman68 |
question
Question About My Wheelchair Motors Sabertooth
I haven't had much time or space to work with the wheelchair motors and the thing I noticed is that when the wheelchair was assembled, if I told it to go forward it would. I have no encoders, just two wires from the motors to the sabertooth for power. But, not now that I am driving the wheelchair motors straight from the sabertooth, when I tell it...
5
3 k
MovieMaker |
question
Sonar Distance Sensor
Does anyone else have issues with their sonar sensors fluctuating to read 255? The sensors work and they do provide distance values as I move an object in front of them, but...
6
5 k
JustinRatliff |