Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
MIDI I/O for ARC: send/receive notes, run per-note scripts, control PC or external instruments, with panic to stop stuck notes.
Featured
Convert a Caterpillar toy with EZ-Bot: install continuous servos for treads, hot-glue servo horns and route cables for compact drive.
question
Time Lapse With A Gopro
Here's a video which shows how you can use a GoPro for time lapse photography with Roli. - https://www.youtube.com/watch?v=IreUCKTxbbg Question - which control is being used?...
7
3 k
Stika |
question
Advice Needed For Computer Courses
Guys, need some help... I feel that I know a fair bit about robotics however I am held back by my lack of computer knowledge in general... I have actually had a few job offers after my inMoov video but I turned them down because I am a bit of a dumb a** when it comes to computer knowledge... I can't very go into an interview if the HR guy asks me...
21
7 k
Dunning-Kruger |
question
Ez4 Controller
To whom it may concern if I purchase the head of JD with the camera to use on another platform do I need to but the EZB Controller in order for it to work?
10
4 k
Jerseylance |
question
Query Regarding Ez-Script-Help.Pdf
Hello Please can you check the EZ-Script-Help.pdf file for the two possible amendments : Under REPEATWHILE example : should "REPEATUNTIL" be replaced with "REPEATWHILE" and Under GetServo and SetServo : should "100" be replaced with "180" Thanks Ian
3
3 k
Dunning-Kruger |
question
Sayezb Repeating Question
So I'm gritting my teeth try to figure out why the SayEZB command keeps repeating the phrase over and over. Usually around three times but not always. When no scripts are running it functions normally. When I start running 3 scripts, which are similar but monitor a different digital port. :loop IF (GetDigital(D14) = 1)...
4
3 k
leversofpower |
question
Ez B V3 Mobile App
Anyone have a backup copy of this they can share with me?
6
2 k
Rich |
question
What Americans Know About Canada
There may be an ad first and hopefully the video isn't blocked anywhere... I laughed so hard.... America on Canada Possibly staged, but still funny...
35
6 k
V692 |
question
Color Tracking Algorithm
Hi, @Dj_Sures First, I've been playing around with my JD revolution and I've really enjoyed the camera tracking functions (thank you !). Out of an interest in understanding how these things actually work, I was wondering how exactly the color recognition is done? Is it a clustering algorithm or is a different method used? Would be able to recommend...
5
3 k
Prenil01 |
question
Camera Grids And A Update
She is not dressed but has places to go! I just wanted to share a progress photos. Doombot made me think she needed a more proper look, so I built a torso. His build will...
11
4 k
OakMot |
question
Strategies For Minimizing Ezb Disconnections
The EZB is connected to my router. The laptop is connected to the router. My laptop is not disconnecting to the router or is exhibiting any issues with the network connection or traffic. Does anyone know why the EZB unexpectedly drops connection to ARC? What conditions cause this is happen? Does the EZB have an error code stored indicating why the...
16
4 k
thetechguru |
question
Bi Colour Led Matrix
ok I've looked for it but can't find the thread, just need to make sure these work with v4s i2c either in one or two colours or will only one colour be possible https://www.adafruit.com/product/902
4
3 k
bborastero |
question
Ez-Bit Extension Cube
I need 1 ez-bit extension cube for my roli. I haven't been able to find one in any of the listed retail stores in the U.S.A. and I don't think I want to get it from China for $20 shipping charge. So, is my only option is to have someone in the comunity print me one, and can I have it done for $5 + reasonable shipping costs? I'm just a little...
8
3 k
thetechguru |