Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Human-like audio via IBM Watson Text-to-Speech: multi-language, selectable voices for accessibility and automated interactions. IBM Cloud required.
Featured
16 Hitec HSR-8498NB servos on dual external boards plus a 17th camera servo; 0.38A @6V draw, 1500mAh NiMH per foot and EZB aux power.
question
Script Help - Reading From A File
Hi, I am looking for help with a script or to help guide me to a script that will allow me to read contents from a saved file and compare to a string value. I already have a script that will get the value of a servo, and store it to a file. I would like to read that same file and compare the values. Thanks.
17
5 k
DJ Sures |
question
ARC On Zeki Andriod Device
I am thinking about buying a JD Revolution. In anticipation of that I was trying to load ARC on my tablet. I have a Zeki TBD753B, running Android version 4.1.1(Jelly...
10
3 k
DJ Sures |
question
Need Info On How To Design Faceplates (Templates) For Ezb Mobile
OK fellow members of this fine forum. I'm looking for guidance, and procedures used to create nice looking Mobile App images and how are the button presses accomplished underneath the overlays ? Oh, and how are the multiple faceplates toggled ?
4
3 k
Robot Doc |
question
What Is Matrix?
i get an error trying to use the ping sensor.something about matrix is not good. and the text is in nederlands written bigger pic
74
8 k
Dunning-Kruger |
question
Snapshot Controls
I don't see it in the script help so I assume there is no way to name the snapshot that is taken or change the directory? Is there a way to do this, if not could it be in the next release?
1
3 k
DJ Sures |
question
Flashforge Dreamer Vs Creator Pro
Started a new thread, sorry @bhouston for high-jacking your Inmoov thread. @Richard You posted: >>>If I had a choice (which I did) between the Dreamer and the Creator Pro... It >>>would be the Creator Pro hands down... I took @Doc's advice and purchased >>>the Creator Pro and it has been an awesome printer.... Smile What...
5
10 k
Dunning-Kruger |
question
Robi Has Come Alive
well.. after long looking i found the error. now he and me needs to practise japanes alot. thanks to dj ,he gave me the tip where to look.
6
3 k
Nomad 6R |
question
Ez-B V4 Robot Brain Overview
I believe that the ports are ADC ports are labeled wrong. Goto Learn - Developers Kit - Section 2 Ez-B V4 Robot Brain Overview. Shouldn't ADC0 Be at the bottom near...
3
3 k
Nomad 6R |
question
Servo And Ultrasonic Sensor
I have the Sensor hooked up on D0 and D1. It works fine. I have the servos on D4 and D5. When I try to move the Robot it fries the sensor. The sensor goes to 255 and never works again. Is there some rule of thumb about how many ports they should be separated? Or is there something else I need to do to make it so I don't fry any more sensors?...
2
2 k
dbeard |
question
I2c Connector Information
Does anyone have a source for the i2c connector/cable in the states? I can't seem to find it at the re-sellers listed at the ezrobot shop. Or a connector name eg. JST-PH?
19
4 k
Nomad 6R |
question
New Emaill Address
Need help, How do I update my email details in side my account details etc thanks
3
3 k
Nomad 6R |
question
![How To Connect Your Ez-B V4 To Your Computer(Both Ways[Ap And Client])](/uploads/thumbnails/2265.jpg)
How To Connect Your Ez-B V4 To Your Computer(Both Ways[Ap And Client])
I made a few How-to videos showing people how to connect the ez-b v4 in both Ap...
36
12 k
tevans |