Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Legacy iRobot Discovery and 4xxx control via EZB software-serial (D0), supports Arduino/EZ-Robot, adjustable baud rate; not for hardware UART/USB
Featured
Control a second robot arm from an iPad with the MobiMotion app-drive via accelerometer or joystick; photos show the build and setup.
question
Ezb-V4 Firmware Upgrade?
Hi there. I am starting out with the EZ Robot Dev kit, and I want to make sure my device has the correct and latest firmware. The webserver reports it to be: EZ-WiFi v0.4a...
14
4 k
WayneA. |
question
General Plug- In Security Questin
With the ability of anyone making plug- ins and the ability to interface most anything as public hosted on github, who is screening or watching for viruses, malware, spyware, etc. With robots having cameras, audio, home sensors to control monitor your home etc. Who is to know of back doors, etc. You hear about nanny cameras audios hacked by people...
4
3 k
Redzone |
question
Sdk - How Do I Connect To ARC?
HI there. Maybe I am overlooking something, but I can't find any reference on how to connect to the ARC Software, using the SDK. All the examples show a direct connection to the EZB (Board). I want to access my "project" instance inside ARC, and interact with my board using the SDK (parallel to the controls already set up and working...
7
3 k
FadeDude |
question
New Very Green Roboticist
Hey guys. Absolute robo n00b here from South Africa. Just received my Dev Kit, and I am very excited to start! @DJSures , I have not even touched any of the stuff yet, but I must commend you on what you have created here. I am in awe of all that you have created alongside this product, as well as the product itself. All the scripts, the Custom IDE,...
5
3 k
thetechguru |
question
Using Foscam F19831p Ip Camera In ARC Mobile (Android)
Hello DJ, We conversed about enabling specifically the Foscam IP Cameras in the ARC Mobile App. You mentioned that there was an issue with Apple Phones that wouldn't allow ARC Mobile to work with IP Cams on the Apple Phones. Would this be a restriction for Android Phones as well? If not would it be possible for you to modify the Android Phone App...
9
3 k
rbonari |
question
Tracking / Personality Generator
I'm just starting out with tracking. I have the face tracking working pretty well but when I turn on my personality generator, a very simple movement and speech script, it interferes with the tracking. Is there a way to pause the personality generator when other functions are running? Then lasts say is the robot is idle for 2 minutes it can start...
2
3 k
stephenhoey |
question
Sabertooth And Ezb V4
(Newbie here)..... lol I have been fighting for the past two days now to get my robot to move with no luck. I have a sabertooth 2x25 that works fine if I hook it to a RC receiver...
20
5 k
robotking69 |
question
I'm Really Disappointed
Really disappointed that the vacuum cleaner used in the new facility seems to have no modifications. None at all. This clearly won't do!
4
3 k
jstarne1 |
question
How To Use Jd Head Follow Position For Face Detection In C#
Hello @ptp I want to use head follow position in ur project as ARC in anther words when jd detect...
5
3 k
shaimaabes |
question
Loop Script
so i am not sure what I am missing as this is pretty simple... I am running this on my iphone... however, it will not loop (just runs once and stops)... i have other scripts running loops.. not sure why this does not work... maybe i still need coffee and I am overlooking something really easy.. :autor ControlCommand("r2voice",...
5
3 k
DJ Sures |
question
Ezrobot Bb Droid
Hi guys very new here, this is a project I want to build. my question is can I connect two controller boards one a a master and the other as slave for movement. My idea is i want the...
1
2 k
DJ Sures |
question
Short Circuit / Melted Fuse
I have been blowing the 20A fuse of my EZBV4 power base while plugging in servos. I just figured out why (and I'll tell you why I've been making a stupid mistake): I...
1
3 k
Zxen |