Robot Programming Questions and ARC Help
Get help with ARC scripts, Robot Skills, hardware connections and robot behavior. Browse questions and answers from the Synthiam community.
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
I Make Robots Crew Socks
Autonomous AI
Autonomous AI robot skill with vision, speech, movement, animations, and self-directed task...
Azure Text To Speech
Azure Text-to-Speech for ARC: generate natural-sounding robot speech with Microsoft Azure voices,...
Exosphere
Telepresence and remote control for any robot with human-assisted tasks, video, audio, and AI...
Azure Speech Synthes…
Microsoft Azure neural text-to-speech for ARCx scripts and skills, with multilingual voices, SSML...
Rtk Gps
RTK GPS rover/base skill with NTRIP corrections, cm-level pose, heading support, map fusion, and NMS...
Outdoor Navigator
GPS-driven outdoor robot navigation with satellite maps, saved waypoints, zones, no-go areas,...
Balancing controller for Sainsmart v3 (and compatible) robots: PID tuning, real‑time telemetry, angle offset, movement and calibration via ARC.
Sonar For Universalbot
Hello, First a little background: I have to do a senior project for my class. The thing is it had to use the raspberry pi. So I chose to use the raspberry pi and the Ez-Robot...
21
5 k
Raspberry Pi Offline Speech Recognition
I was scouring the internet this afternoon, and came across this project. It's a stand alone sound pattern recognition program for raspberry pi, which can be used as speech recognition for verbal commands. I have to do more research into it, and start experimenting, but I wanted to mention it on the forum in case someone had already, or if someone...
4
5 k
Volt Board
it i solder a wire straight on the spkr from the ezbv4,howmany volt wil, that be?i have a black and red wire .
5
3 k
Continuous Servo Calibration Or Hbridge Question?
Edited Original Post: Good Afternoon, I am trying to get a Roli to work for a school club and after spending the majority...
15
3 k
Creating A Sort Of Ez Robot Taskmaster
Hello! I am trying to make something I can "use" not just for fun but to actually accomplish stuff around the house over WiFi. Here...
3
3 k
New Arm Mod Jd
would this be a good idea to ad a servo more to the arm jd. original the arm is 15 cm long,with this mod it is 18 long. so a dummy servo would be good,between the legs and body. some kinda case for the two servo 's to put in. picture of dummy servo's video
2
4 k
Charging Jd With A Rc Hobby Charger
Hi! Do I need to purchase the EZ robot charger to charge JD or is there a way to charge JD with an RC batter charger without taking JD apart or...
9
3 k
New Products
Hello DJ, Any updates and approximate dates for the release of new products? Ron
5
4 k
Onemorequestion About Power Supply
OK, the way I do it is to have 12V and 6 volt and 5 volt power sources. I start with my batteries which are two 12V lead Acid 9ah batteries wired in Parallel. I use the 12Vfor the motors, the 6V for the servos and the 5V for the signal sensors, etc. Then I hook all the grounds together and pull a positive wire off of each. I run the plus wire to...
0
3 k
Sabertooth Motor Driver On Ez Robot Controller; Using Wheelchair Motors
Hello all, I’ve been following some threads on people who are using the...
9
5 k
The Alternate Power Adapter Is Not Fitting In With The Power Shell
I got this product for my birthday a few years ago and still haven't been able to fit the Alternate Power Adapter into the Power Shell. I need help! confused wat?
5
2 k
Save Blockly Code To Ez-Cloud
I have successfully saved a project to EZ-Cloud, but it does not save a Blockly program I wrote. It seems the Blockly code is only saved locally. That limits...
5
2 k