jstarne1
Jarvis Hacked Omnibot 2000 W Pc ,Ezb &Amp; Vacuum Inside By Josh Starnes
Jarvis is a project inspired in part by Jarvis the AI that belongs to Tony Stark in the movie and comic book series IRON MAN. This is my first real robot with no previous experience. I dreamed of making a couple of robots one was a vacuum robot with 4 motors. Brush, impeller, and one motor.driving each wheel. This was back in 98 before roomba was thought of. Lol my drawings as a kid even resembled one. Now that I am older and have tools like EZ Robot I can start making these dreams come true. It has been a learning experience and I hope to learn more. Jarvis is basically my personal computer but also will have a few key features. Goals are that he can help maintain a home by vacuuming and sweeping the floors. My fish need to be taken care of while I am away so scheduled feedings and turning tank lights on in the morning and off at night are in the works. Jarvis can answer calls , act as a telepresence device because he has a camera and screen. He would be great for security by detecting motion, taking pictures or video and sounding.alarm if intruders are detected. Just for fun I would like Jarvis to bring cold beers to the table when asked to which I am sure would be a great conversation piece. Jarvis will be autonomous in some.situations and because of the wireless video link by wifi and wireless keyboard and mouse, I can be checking facebook on either the upstairs or downstairs Tv while Jarvis is roaming the house or cleaning. Thanks to 4g USB antenna Jarvis is not limited to my home and can.take control quest (or kill.switch.lol) from a smart phone or laptop. This makes the Jarvis project.show friendly as I can take.him to show off without lugging around a laptop or other equipment. Also i do plan to somhow work in being able to control his base movements , head ect from a ps3 bluetooth.controller. I'm still thinking of other tasks Jarvis could do but I gotta get this guy together so there is no time to waste!
February 1012 when I first received the Tomy Omnibot 2000 . My starting main parts were/are asus mini itx motherboard, 8 GB ram , Win 7, 250gb Western Digital Hard Drive, Nvidia 560ti graphics card, 2 ghz AMD 25watt tdp dual core CPU, Thermaltake 430 watt psu, 460 watt apc backup, Ez Board Kit w EZ WIRELESS CAM , Shark vx63 cordless vacuum, 4 Power Sonic batteries 12v 9ah , power HD 240 oz servos, hitec 645mg 130oz in servos, hitec 5995tg 400 oz in servos , Robotzone.gearbox 5 to 1 ratio for shoulders and other electronics.
At this time im getting the body ready to start putting things together. The fun begins!
WHATS wrong with your MINON PROJECT
The minion had way to many limitations so I dismantled him. Started the franken bot dude and got discouraged with the Robosapien body and base. Ya know the one you sent me the Hearoid body.
SORRY to hear that,dont give up,i found a another head for hearoid robot if you need it,can let you have it for free only pay shipping,but will have to wait 3 weeks in china for work
I have a head, thank you.
@Sam hey I been moving all week , the motors I got from robot maker but can buy them from robotshop too. The motors are RS585 Mabuchi I believe. They are the motors a roomba uses for the main brush. Thank you! I will pull the gearbox out and get some measurements.;) the room a motors are just about the same size but they have a noticeable increase in torque over originals. If you are looking for more power and don't wanna buy those then maybe you could use two more original motors.
SAM i can help you out and give them to you free,just little ,i have a lot of them Since i still need your help on fixing my tail on my MYLO puppy.
I said I'd help regardless all you have to do is send it to me. I'm not sure I want to do anything with the current gear box. I think I might use that for something else. I'm planning on going to Pick and Pull and getting window motors. Will see how that works out.
OK so I picked up a new SKILL brand Octo hand sander and three sets of sand paper. 60 120 and 220 grits. I went to start setting up the table outside and turn about my ext cord was too short because I don't have a outside outlet. After I finally got back with the new 25 ft ext cord it was getting dark because its 823 pm. I can still do the initial filling with bon do on certain spots now however. I will mark them with a black sharpie.