Stream All The Video Sources icon Stream All The Video Sources — Stream video from any URI/protocol (RTMP, RTSP, HTTP, UDP, etc.) to a selected ARC camera device for real-time network feed playback. Try it →
Robot Showcase

Inmoov 3D Printed Robot

7,315 views 21 comments 4 likes 10 photos 1 video

About this robot

User-inserted image

Progress on the lower and mid stomach!

Just getting the neo pixel ring running, hopefully will be installing soon! Not sure if I can shove an Aduino UNO in there, or if I am going to have to get a nano because of space.

User-inserted image

Here are some photos of my inmoov robot I started working on Dec 2019

User-inserted image

By — Last update

Discover more robots

Robots the community built with Synthiam ARC. Get ideas for your next build.


ARC Pro

Upgrade to ARC Pro

Elevate your robot's capabilities to the next level with Synthiam ARC Pro, unlocking a world of possibilities in robot programming.

#2  

Here is a short video for the head servo testing I did a while back.

Author Avatar
PRO
Canada
#3  

@Tonzatonka  As a fellow inmoov builder let me be the first to congratulate you on a excellent inmoov build, well done.

Author Avatar
PRO
USA
#4   — Edited

Tonzatonka - excellent work.

have you seem some of my robots? under robots -  just head, , eyes, mouth, jaw (synching voice) movements?

EzAng

#5  

Yes, nice build. In 3 months you got a lot accomplished! Carry on.

#6  

Great job - also coming from an inmoov builder. I like the combination of the head pieces. I did the same. If you look for my thread on here you will find quite a bit of info as well. I converted over from MRL to Synthiam. I also created some graphics for the AutoPosition window that may be of use to you.

Perry

Author Avatar
PRO
Synthiam
LinkedIn Thingiverse Twitter YouTube GitHub
#7  

Hey Perrry - we're gonna start using our InMoov (made by Richard R) for demoing exosphere with ARC. Any tips on how you guys get the fingers to open and close better? I seem to struggle with getting them to do anything actually useful. Perhaps my design is outdated on this robot?

Author Avatar
PRO
Canada
#8  

I have a Way DJ I will try to do the demo ASAP.