Wowwee MIP V2 icon Wowwee MIP V2 — UART interface to hack WowWee MIP with ESP32/ESP32‑Cam or EZ‑B v4 for ARC; hardware UART preferred, configurable power and baud 9600/115200 Try it →
Robot Showcase

Hasbro R2d2 Hacked With Iotiny

8,750 views 20 comments 3 likes 2 videos

About this robot

This build was in two parts. The original build was hacked live at Comic Expo in Calgary Alberta with an EZ-B v3 in 2012. It was a fun hack, because I performed the hack live, where people could watch on a stage. The second hack was in 2017, where we replaced the EZ-B v3 with an IoTiny. 

The recent hack now has the following...

Here's the video of the original hack from 2012 with the EZ-B v3 at Comic Expo...

By — Last update

More robots by DJ Sures

Other projects from the same builder.

Discover more robots

Robots the community built with Synthiam ARC. Get ideas for your next build.


ARC Pro

Upgrade to ARC Pro

Stay on the cutting edge of robotics with ARC Pro, guaranteeing that your robot is always ahead of the game.

#1  

That looks like fun, I'm going to have to watch those vids!

#2  

DJ,  I am planning this hack.  Do you have any internal pics of the hack?  Did you remove the existing control board?  How did you attach the servo for the dome?  Would you mind posting any photos?

Author Avatar
PRO
Canada
LinkedIn Thingiverse Twitter YouTube TikTok
#3  

Hi @mstephens_42,

I'm not DJ but I can certainly provide my personal experience with this R2D2 toy robot. I'm certain there are a few others that can provide some info as well, as a few of us here in the community have tackled this hack.

I have some pics of the internals but I'll have to create a "Robot" project on here soon to share them. I believe all of us have gutted the control board in order to fit our own control electronics. I actually kept the existing motor in the dome and controlled it with an H-Bridge. In order to get the position you can read the on board infrared encoder sensors.

An alternate method is to steal some servo electronics to attach to the motor but you will have to replace the potentiometer with resistors or find a clever way to mount it to get the head position. 

Otherwise, I'm sure DJ will share how he did it.

If you'd like to see the raw footage of me hacking my R2D2 interactive toy, check out the live hack I did a few months ago:

#4  

Jeremie, Thanks so much.  I will be watching this and hacking tonight!   Can you post the project code?

Mark

#6  

Hello All -  Bringing this thread back to life.

Has anyone been able to marry io-tiny with existing stock components? Meaning, stock programs, sounds, human detection sensor, IR, etc?

Or is this a complete rebuild?

Thank you.

Author Avatar
PRO
Canada
LinkedIn Thingiverse Twitter YouTube TikTok
#7  

I guess you mean has anyone tried to hack the main board and control it. I don’t know anyone who has. It’s not a full rebuild, there’s a bunch of stuff you can reuse.

I tried to reuse the ultrasonic sensor but I wasn’t able to figure out its protocol. I reused the motors by using H-Bridges and I also reused the existing IR encoders for the head. I did remove the battery holder with a dremel and used a 7.4V battery instead. I reused the front button and LED.

#8  

Thank you any special skill for the ir encoders?