All Community Content
Synthiam Credit
Log In
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Synthiam Swag
See All Swag
I Make Robots Crew Socks
Recent Robot Skills
View All
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Human-like audio via IBM Watson Text-to-Speech: multi-language, selectable voices for accessibility and automated interactions. IBM Cloud required.
Featured
Robotic arm built with EZ-Bits to assist feeding users, project files available on Synthiam cloud for replication and customization.
question
Noisy Analog Dat On The V4
I have about 5 adc units of noise on my 256 adc analog inputs. Also the battery voltage and cpu temperature are noisy. I have checked my incoming battery voltage and it is steady. I tried to filter the analog inputs but no luck there. Thanks oops I guess I can not go back and fix my typo in the title.
27
6 k
Rich |
question
Wall Wart Power
Hi there all, My ez b is here. Yeah Whilst testing I was just wondering if I could use a wall wart to power the ez b to save my batteries? The one that I have in mind is Input 100 -240V 50/60Hz0 15A Output 7V 42A Before I go and blow up my beloved ez b I thought I would check with my peers on the forum Thanks guys and girls
9
3 k
Rich |
question
Question About Servos
Ok, I don't really know how to word this question. I re-built my Sunshine robot. Her arms and shoulders were very weak. so, I replaced the servos with ones that are very strong. I setup the robots, I thought to the right positions. When It came time to test her, I started with her right shoulder. It seemed to work Strong, but, it did not go into...
7
3 k
MovieMaker |
question
Kainy Remote Desktop Android App That Is A Customizable Gamepad Controller
I was told about this app called Kainy for android phones. Its a...
2
4 k
ZionPhil |
question
Servo Position
I know this may be a dumb question. How do I setup the servos so they both go forward. I have to place my servos (see attached picture) exactly the same to get them to roll in the correct...
4
2 k
Dave Schulpius |
question
Radar Scan Control
Does the radar scan control work via the mobile interface or is it just scripting? Thanks
6
3 k
Darathian |
blog
Dj's Als Ice Bucket Challenge
Join the ALS Ice Bucket Challenge: donate to causes that matter and encourage EZ-Robot community members to participate.
20
5 k
Rich |
question
Which Ezbits Do I Need Tio Print For Six
Which servo parts do I print to make Six. I have my ezb4 n order wanting to print my own Six Which ones and how many of each?
4
2 k
slim6072 |
question
Ha Ha Ha Robot Hell Baby
This is just crazy! hahah
3
3 k
MovieMaker |
question
Robot Competitions
There are many organizations around the world that sponsor robot competitions for school students from Jr High to College. While there are some good things about these competitions, there are also some things that I really dont like. For example, a team is given a problem to solve with an autonomous robot. It is good that the team has to work...
10
5 k
jstarne1 |
question
Sparkfun Mp3 Trigger V2
I am having a problem with the MP3 trigger. I have it connected like the video, but it does not want to play with EZ-B. I have connected the external power and speaker, and tested out the MP3 trigger and it works. Red Power light is on and green lights blinks like it should. When I connect it to the EZ-B and set it up the Red power light comes on...
12
4 k
DJ Sures |
question
Radar Control Reverse
@DJ Would it be possible to get an addition to the radar control so we can specify how long the robot should back up before turning. Thanks
7
3 k
Jmcneill |