All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Stream video from any URI/protocol (RTMP, RTSP, HTTP, UDP, etc.) to a selected ARC camera device for real-time network feed playback.
Featured
Welded robot frame prototype mid-build with contour pieces and planned aluminum platforms; next steps include head and arms assembly.
robot
Mohamed's To Make A Bb8 Robot That Can T
BB8 robot that talks with your mother, pulls out a kitchen cutlery dispenser, and switches to RC control for your brother's play.
0
2 k
Mohamed aku |
question
Ezb V4 Turns Itself Off Whenever I Send A Command
Every time I move a servo through WiFi the ezb v4 makes a chime like its starting up but its really disconnecting. I tightened the female connectors (I dont like the dean prongs - the base doubles the size of the unit for no reason). I thought this might be due to the 6V20A power supply I had begun using instead of 7.5V48A I was using previously...
29
5 k
thetechguru |
question
Meet Sofia
talking ai sofia
2
3 k
Nomad 6R |
robot
Doombot's Archetype Finally Complete
Archetype droid using EZbits and an EZ-B: expandable design, currently on a 2A regulator with supercap fix; battery upgrade and videos planned.
50
14 k
Doombot |
release
Windows Release 2016.03.27.00
Synthiam ARC EZ-B firmware manager: EZ-B Mini firmware, camera multicolor with EZ-Script color control, MPU9250 support, serial RGB LED for ez-bit
4
4 k
thetechguru |
question
Power Supply For Either Ezb V4 Or V3
Does anybody have a link or a suggestion as to what AC Power supply I could use with over 20 large Servos? Also if I wanted to use external battery what size and AMPs. I'm currently using a 12V AD to DC with 1.25 amp power supply. When running the EZB program ( auto position) running 10 large servo, it works for about 3 times then seems to not move...
22
6 k
Jeremie |
question
Just Received Ezb V4 Controller With Camera.No Power Supply Included? From Re Se
https://www.robotshop.com/en/ez-b-v4-wifi-robot-controller-with-camera.html#productsReviewBoxTitle EZ-B V4 WiFi Robot Controller with Camera Product Code : RB-Ezr-16 by EZ-Robot I was thrilled to receive this in one day, free shipping from Robot Shop.. But didn't received Power Supply? No where does it state the power supply is separate and the...
12
4 k
ptp |
question
Anyone Experience This On V4
Sorry to be so late to respond. I just got out of the Hospital. Anyone experience this on EZB V4: I apply power. It starts off with Blue Light It goes to Blinking blue light and stays. I hook up the EZB 4 to the first wireless network fine. when I try to hook in ARC, I can not. There is NO Sound from the EZB. It says: Connection Failed:...
10
4 k
MovieMaker |
question
Output Mismatch
Hi, I've a problem when I use forward(speed , millisecond) function , the robot move but it didn't stop after 5 sec . ex forward(90,5000) it didn't stop after 5 sec why ?
1
2 k
DJ Sures |
robot
Chris14's Would Be Good To Have A Packag
Astromech kit idea for R2 and BB8 builders offering IP-safe options for hobbyist droid construction
0
2 k
chris14 |
question
Disabling Certain Custom Colours , Blod Detection
Hi. Does anyone know if it is possible to temporarily disable certain custom colour? I have 3 custom colours in the multicolour tab, red, blue and green. What I want to do is disable two colours so the camera will only track the colour I wish, and ignore the other two even when all colours are in view of the camera. I need a command like this:...
2
2 k
adfe74 |
robot
Sulla's R2d2 Bb-8 Mashup Robot Project
R2-D2/BB-8 mashup robot project - dome parts nearly complete; free wallpaper at pwlawrence.com
12
7 k
Mohamed aku |