All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Control Feetech bus servos via EZB UART or PC COM in ARC; map Vx ports to IDs; supports position, speed, acceleration, release at 1M baud
Featured
Interactive desktop robots built from a Harbor Freight parts box using EZ-B, micro servos, pan/tilt and LEDs, programmed to converse with...
robot
Stscomptech's I Am Hoping To Build A Robot T
Mobile robot performs weather readings at multiple locations and streams sensor data to a central computer for collection and analysis.
0
2 k
stscomptech |
question
Ezrobot Restart Itself When I Use The Servo
Bonjour, Est-ce que je peux avoir de l'aide en Français ? J'ai un problème lorsque j'utilise un servo, le boitier EZ-B redémarre tout...
8
3 k
FDW34 |
question
New Scratch-Like Environment
DJ, You continue to amaze. Congrats on Make article. With the new Scratch Like Interface, are there examples or help files?
1
3 k
DJ Sures |
question
Ez-B V4 Disconnecting If I Load A Project
Hi all, Sorry for the noob questions but i have recieved my ez-b developer kit and have printed all the ez-bit to create JD. My problem is that if i connect to the ez-b with an empty project it connects and never disconnects, But if i try and load JD project it seems to mess up the controller even without any servos attached. I did have a look at...
7
3 k
Wofy |
question
Connection Lost
Hello everybody, I have the following problem with my JD. Every time I turn it on and the W-Lan connection is ready, I go into the ARC and click on connect, following happens. I use the Example of JD in ARC EZB 0: EZB 1: EZB 2: EZB 3: EZB 4: Screen Resolution: 1280x720 (96x96 dpi) Version: 2017.01.29.00 Object Recognition Initialized. Object...
4
2 k
voxi |
question
System Reboots When Servos Move
I'm running a 12 volt 3 amp power supply. Then I have a 12 volt to 6 volt DC step-down to power my EZ-B4 and servos. After the robot runs a little while...
30
7 k
Wofy |
question
Servo Replaced On Jd Foot - It Still Won't Move
Servo Replaced On Jd Foot - It Still Won't Move. Ideas?
6
3 k
smurray |
question
Meccanoid 4Ft Tall Robot
so i was wondering if any one has seen and consider the use of turning the meccanoid 2.0xl 4ft robot from its factory controlled unit to ez-v4 version. it is a very simple...
1
4 k
DJ Sures |
question
Soundboard - Getting Mp3s
www.loudtronix.me automatically converts youtube videos into MP3 sound files for you so all you have to do is click 'Download'. I highly recommend it.
0
2 k
Zxen |
question
Voice Recognition Question
Hey Forum.. i have problem with voice recognition ,,. when i add voice recognition the follow message appears to my screen..( i use windows 10) Regards Thanos
4
2 k
DJ Sures |
question
Ez-B V3 Buy Back
hello all, I was reading around on here and seen a possible buy back on the ez-b v3. most of the post were old, so I thought I would ask. is it still available? I really want to get the new ez-b and that would be a great help. thanks, Airwave1206
2
2 k
airwave1206 |
question
Nice Little Write-Up In Makezine Today
https://makezine.com/2017/01/31/ez-robot/ I can't view the video while at work, but the article is a nice short history of EZ-Robot. Alan
5
3 k
DJ Sures |