All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Queries NMS Navigation2D scans for range at specific angles or arcs, returning latest distance data...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Discover EZB WiFi controllers by name, auto-bind connections, avoid IP management; live discovery and multi-EZB support for ARC.
Featured
Scratch-built expandable robot platform for roaming guard, companion voice-controlled info, remote presence and transporting items between rooms.
robot
Ezang's Mr. Conehead Video For You To Watch In 2019
Mr. ConeHead 2019 video to watch, hope it's not too long
4
3 k
Nink |
question
Inconsistent Speed Speech Settings After Installing Cepstral Voices
After installing some Ceptral voices and adjusting some Windows settings, speech...
8
4 k
ptp |
question
Camera Works But No Servo Movement
We assembled the jd robot exactly as in the instructions, including servo alignment. When we turn it on, the camera works but there is no servo twitch. No actions from the app are executed. How can we figure out what is wrong?
1
2 k
Jeremie |
question
Ezb 4 Controller Connection
To whom it may concern I would like to know why do my ezb 4 restart when I'm testing my smart servos? I have smart digital servos and Dymanixel servos, but it's the regular digital servos I'm testing 1st. My Dymanixel servos are connected to a 3pin hub which is on port 5 and 6 hooked up. The digital servos are plugged in the ezb 4 thank you, Mike.
4
2 k
Jerseylance |
question
Scripting Multiple Robot Actions One After Another
I'm currently using Script Manager to run multiple scripts in sequence. I know that ControlCommand is non-blocking by default but is there a way to wait for a script to finish before executing the next? The idea is to basically wait for each robot to finish asking/answering/doing something before moving on. I've mostly been using...
5
3 k
vincent.j |
robot
Ezang's Mr. Conehead Monster
Mr. ConeHead Monster robot: 6 servos, 2 grippers, custom rear wheels and camera to see you - DIY fun by Angelo
5
3 k
RoboHappy |
robot
Robohappy's Adventurebot4wd
4-wheel drive robot upgrade using four CR servos with Y-splitter cables to preserve directional control; camera, sensors and more planned
4
4 k
Nomad 6R |
question
Inmoov With Ezb
I have purchased 2 ezb’s and was wondering two things. Where Can I mount them. And how do I connect both at once so the ARCs can move in synchronization.
64
11 k
Herr Ball |
robot
Animator28's AVA (Advanced Visual Android)
Human-sized open-source 3D-printed humanoid robot AVA with free Thingiverse files, built on the EZB platform, seeking coding guidance.
7
3 k
Mickey666Maus |
question
How To Cut The Port Power After Completed The Action
Hi, I have a problem about the servo, it is easy to burn out after completed the command. It is because the last...
16
5 k
Dave Schulpius |
robot
Mastersailor's Noisy Boi (Trademark Pending)
Sub-10 ft remote network robot: 47 mph, plow, flamethrower, remote start, trailer hookup, walks dogs, sentry mode with siren,...
3
3 k
Mastersailor |
live hack
Power Glove Live Hack....Now We're Playing With Power!
Control robots with a Power Glove using EZ-Builder, finger sensors and accelerometer drive robot movements; join...
0
2 k
Jeremie |