All Community Content
Synthiam Credit
Log In
Earn Free Credit
Share your robots, answer questions, and help others — earn credit toward ARC Pro, AI credits, and robot swag.
Exosphere
What is Exosphere?
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
Synthiam Swag
See All Swag
I Make Robots Crew Socks
Recent Robot Skills
View All
Advanced Speech Reco…
Azure Cognitive Speech recognition for ARC with custom API credentials, scripting, language control,...
Audio File Out EZB
Stream MP3 or WAV files from your PC to the primary EZ-B speaker for robot audio playback, alerts,...
PCA9685 Servo Driver
Drive 16 servos over EZB I2C with a PCA9685 PWM controller, using ARC servo commands and...
Featured
Broadcast live audio and video from ARC camera to the web via HLS; cross-browser streaming. Requires router configuration for external access.
Featured
EZ-B powered 20-DOF PHILO humanoid: AutoPosition setup in hours, servo power tips, regulator heat and brownout notes.
question
Connecting And Controlling Serial Servos
Hi, I would like to connect and run some serial servos using my EZ-B v4. Unfortunately, they are not Feetech, so which Project should I use?
5
2 k
barnardsb |
robot
Daman's Yet Another Wall-E
Compact Wall-E build with EZ-Robot: webcam eye, continuous servos, EZ-B mounting, servo speed control and tips for fitting and track troubleshooting
35
9 k
Jeremie |
question
EZ Script Clearvariable Does Not Clear Variable
I have an EZ Script that changes a variable several times. That works well. Then at the end of the script want to clear that...
3
2 k
Dave Schulpius |
question
Brushless Motor Controller
Dear; Can anyone help me to create a custom movement panel to control this brushless motor controller on Arc for EZB Builder? I would greatly appreciate it. Thanks...
20
5 k
josephcjosephc |
robot
Wiinteru's IO Tiny TOMY Armatron
Build a mobile-controlled robot using EZ Robot Developer Kit 2.0 and TOMY Armatron with 5 servos, claw-mounted camera, IO Tiny and battery pack.
1
3 k
Dave Schulpius |
question
Omnibot 2000 Drivetrain Motors
Anyone know a good place to find 2 replacement motors ? Would like them to be about the same size so I dont have to fiddle with the gear box to much
9
3 k
breynolds |
question
23 Pins Only On EZB On Arduino Mega?
How many outputs can you control with EZB on Arduino Mega? The board has 53 outputs but it seems EZB only lets me use dropdown selections for 23. This cant be right. I 3D printed Johnny 5's head from Short Circuit the movie. all the servos, LEDs, relays, and sound files use 39 outputs. What am I doing wrong? Someone please help. I don't have any...
1
2 k
DJ Sures |
robot
Ezang's Some Examples From The Past Of Glyphs, Glyphs With Augmented Reality And QR Codes
Glyph examples with augmented reality and...
0
2 k
EzAng |
robot
Ezang's New Robot Head Video Project 6/15/2021
Robot head teardown and component breakdown from 6/15/2021, revealing build details and assembly insights
4
3 k
EzAng |
hardware
Lattepanda
LattePanda runs Windows and Synthiam ARC, with onboard Arduino (EZB firmware) for GPIO and direct EZB v4 hardwire control with low latency.
31
22 k
question
Min Voltage For IO Tiny
I am working on the T3-DO project from Michael Baddeley Printed Droid. I am planning on using the IO Tiny with MG90 and FS90R servos. These are basically max 6V servos. Does the IO Tiny regulate voltage? My guess is no as I am pretty sure the EZ-BV4 does not either. So, what is the min voltage for the IO Tiny? I don't want to use the EZ-Robot...
3
2 k
MarkTheBotBldr |
question
Connecting A Iotiny/PCA9685 Together?
Was wondering if anyone has connected a PCA9685 to a ioTiny? I am building a robot head for my grandson. Have a extra ioTiny and PCA9685 lying around here and would like to use them. The head has 13 servos, the ioTiny 8 ports, not going to workie! Was hoping I could connect them together for enough ports! I don't want to spend too much on this as I...
4
2 k
Proteus |