All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Animate servos to simulate jaw/mouth with ARC text-to-speech; configurable vowel/consonant timing, start sync, multi-servo control, pause/stop.
Featured
Updating software and wiring a small non-motorized Wall·E: servo port mapping, using stock toy switches on one ADC line with resistors.
question
Easiest Way To Control Individual Motors On Sabertooth
So I received my old 2 x12 back, I tested it, and it's running well. I'm thinking of using it for a couple of upgrades but it would require me to be able to control the motors individually. I did not find anything regarding individual control on the Sabertooth movement panel help. First up I'd like to run the dome motor using this and replace it...
3
2 k
DJ Sures |
question
How To Get Decimal Value As Speech Recognition
On a different note what would you recommend to do for speech recognition for expected phases that is not an integer. Is it...
4
866
Automation Man |
blog
Build A Robot!
Synthiam ARC connects to robot products, toys and DIY kits, offering accessible guides to build advanced robots rivaling corporate designs.
0
2 k
general
Lost In Space B9 Robot Arm Rail Upgrade! Hall Effect Sensor Limit Switches
I'm upgrading the arms in my Lost In Space B9 Robot. One thing I need to...
4
2 k
Dave Schulpius |
question
Electromagnet For EZB
Has anyone added an electromagnet on an EZB. I don’t want to throw power across a coil as I don’t want to burn out EZB. I see some arduino controller electromagnets on Amazon for $10 perhaps a skill for this in ARC? https://www.amazon.com/KEYESTUDIO-Electric-Lifting-Solenoid-Electromagnet/dp/B09B7BQ62W
4
774
Jeremie |
blog
AI-Driven Forest Fire Prevention Robot
Robot removes discarded cigarette butts, quenches burning debris, and sends incident location via MKR GSM 1400 SMS to help prevent wildfires.
0
2 k
question
Error On Saving Project
I recently started getting this error message... I can't figure out the cause. Has anyone come across this before?
8
862
DJ Sures |
general
Ezb-4 Wifi Controller Power
to power the ezb controller what value of voltage needed and at what AM value. im using a 9 voltage power supply at 1 am... no all servo works just the continues
3
690
Synthiam Suppo… |
general
Chopper Update, Sabertooth Movement Panel
Thanks to the new max speed and dead zone settings for Joystick, Chopper is up and around. Before limiting he max speed he was crazy fast...
39
3 k
DJ Sures |
Communication
Connection Diagnostic v6
Diagnose EZ-B Wi-Fi connection issues with verbose EZ-B communication logging, ping tests, log export and diagnostic reports for Synthiam...
0
84 k
Communication
Command Duplicator v7
Duplicate and synchronize commands from one master EZ-B to multiple slave EZ-Bs for simultaneous, mirrored robot actions.
0
78 k
question
How To Move Servo With Touch Screen Device?
Wow you are just knocking it out of the park DJ!!! I made a 16:1 gearbox and it seems to be fast and strong enough I am still make a jig to test if it can handle the weight of the Inmoov arm. I love all the control this skill provides when it comes to controlling the movement. Have to ask again any way to get those new slider controls for us guys...
5
2 k
smiller29 |