Robot Programming Questions and ARC Help

Xbox 360 Wireless Controller For Windows

Hi, Will the Xbox 360 Wireless controller for Windows work fine with ARC out of the box or will I need to program something custom for it? Thanks, Mike

Robosapien First Project

I followed the video and I am currently at the following stage 1. Robosapien powers the ez-robot controller (red and blue light) 2. computer sees the card. (firmware also updated). 3. if I disconnect the servo cable from the controller the standard remote control works. When the servo cable is connected, it doesn't. 4. I have not hooked up the...

Wall-E Builders, Unite! :D

I'm going to be starting up a Wall-E robot from the U-command Wall-e and the EZ robotics kit pretty soon. Does anyone want to share their ideas and talk about them? I'm gettin all excited hehe

Upcoming New Ez-Robot Website Features?

I was curious if there were any features you were willing to divulge on the new website. Any changes to the forums too?

How To Connect Radar Hc-Sr04 On Ez ?

Hi, i want to connect a distance radar HC-SR04 on my ez, but i don't know to do it. And I don't understand the tutorial of DJ. Is there anybody to help me please ? I had understand to connect on the Trig, Echo and GND on D0, then Vcc on D1. Is it right ? But on ARC you can use ADC0 for IR Port ! And how connect Vcc ( HC-SR04) on the ez ? Thank you....

Help Learning To Use The New Ez-B Serial Terminal

Sunday, 24 February 2013 Good Morning DJ ! I APPLAUD Your Addition of Serial Terminal to ARC ! Early this morning I connected to my iRobot Create via Com1 and the Creates Serial Cable, and the minute I set the Baud Rate to 57600, I got the Powerup Dialog Screen from the Create ! I was not so fortunate on the Send Side, trying 128 131 followed by...

Changeing A Glyph Image

Hi Dj ! Recenly, I triyed to tracking new image . So in Camera Config Augumented Reality Change the Glph 1 to my dog photo , then try to Recgnize my dog photo , but, Still recognize original Glph1, Is it regect the additional Image . So maybe I think we can not change the Glph 1 to another image. Is it a correct function of Camera Config of...

Has Anyone Ever Hacked A Furby With Ez-Robot?

I've always been interested in hacking a furby, 1998-2013, has anyone ever done this? if so, how?

Automatic Load And Unload Scripts

@DJSures As my projects get larger I am thinking it would be easier if I could automatically close one project file and load another from within a EZ-Script. We can already auto start a script at application start-up but could this functionality be extended to load and execute a preselected project from within a script? My thinking is this... While...

Vary Output Voltage?

I would like to vary the output voltage on two pins between 0 and 5 volts. This could be used to control LEDs etc. Any one have any hints on how to do this?

What Kind Of Other Wall-E Robots May I Use?

Hi guys, I'm Çhåøs. (short for Çhåøtìç_Røbøtïx) and I was just wondering what other wall-e robotic toys could be used to make the wall-e autonomous robot using your delightful and EZ kit. I see you guys used the "U-command Wall-E" but finding that on my budget is being difficult. Are there any other wall-e robots I can use? Thanks!

Gyro Sensor

Has anyone used a gyro with the EZ-B? If so, does one work better than the other? I'm looking at either, the NXT gyro sensor from https://www.hitechnic.com/cgi-bin/commerce.cgi?preadd=action&key=NGY1044 or the triple axis from https://www.trossenrobotics.com/p/Triple-Axis-Digital-Output-Gyro-ITG-3200.aspx Any ideas are appreciated