Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
PC Remote UI Client for ARC enables remote robot control via customizable multi-page interfaces from other ARC instances.
Featured
Convert a 20" Minion toy into a humanoid with EZ-B v4/2: camera-tracked movable eyes, sound-driven moving mouth, DIY limb replacement
question
Ez-Robot Revolution! Still On Track For July Shipping?
Is EZ-Robot Revolution! Still on track for July shipping? j
10
4 k
Mohamed.r |
question
Doc Motors/H-Bridge
Hello everyone. Am sort of a noob to robotics but I want to get my old RAD robot back to life, and for the two motors I know that it needs an H-BRidge. I saw the manual on how to connect it and all that fun stuff but one of my questions is, If I were to use an H-BRidge on different motors how would I know if the motors would run properly? I guess...
5
2 k
A.Bautista |
question
For Those Of You With 3D Printers
what settings do you like for: number of shells: resolution: infill density: Thanks, Just curious. Mel
15
4 k
MovieMaker |
question
Wiring In A Converter
Ok so in preparation for my V4 coming i'm buying last minute things. one thing that's needed is a way to convert the voltage from the board to 5 volts for sensors. This is what a...
27
7 k
Troy |
question
For The Ez-Robot Team
In the room with all of your 3D printers, are you printing in PLA or ABS? Thanks,
4
3 k
MovieMaker |
question
Just Bought A I-Sobot Robot Off Of Ebay.
Hello everyone :-} Well I am still working on my robot Roamin, just about done with the body and everything else, just waiting on my...
20
11 k
Nomad 6R |
question
I2c To Uart Converter For Two-Way Kangaroo Communication With The V3
I'm starting a new thread based on a suggestion by Robotdoc on another thread to use...
4
3 k
mdeming1 |
question
Multiple Camera's On V4
I was just thinking. how would someone go about putting more than 1 camera on the ez-b v4? would you have to use a wireless camera?
6
3 k
Dunning-Kruger |
question
Old Ez Robot Servo Voltage Needs?
I have been looking through all the old posts and cant find any info anywhere anymore on what the old standard servos needed for voltage feed. I used to plug them right into the old V3 EZB and they ran nicely off the 5vdc it supplied. Anyone know their max voltage?
7
3 k
Steve S |
question
I Need Some Wires
I have a little problem my servo wire is to short and there is nowhere I can get any at all ive tried getting junk from the thrift store here but all the wire I find is way to thin I can...
8
3 k
thetechguru |
question
No Movement Detection
Hello. Uploading the C# example "Movement detection", i can see my program running and connecting to Ezb and to usb camera. I can see camera images, but no "object recognition"........ I am missing something. Why i have not response?
1
2 k
DJ Sures |
question
V4 - Chimes, Voices And Sounds
Is there any way (short of removing the speaker) to turn down or off the Chimes, voices and sounds that come out of the V4 anytime it connects, powers up or encounters any other event? While being helpful they kinda get in the way of the motif of classic robot recreation.
2
3 k
Dave Schulpius |