Robot Building Questions
Subscribe to ARC Pro, and your robot will become a canvas for your imagination, limited only by your creativity.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Builder Coffee Mug, 11oz
Start your robot building day on the right wheel, err foot, with this Synthiam Robot Builder black coffee mug. This...
Featured
Sabertooth Kangaroo
Movement panel for the Kangaroo and Sabertooth from Dimension Engineering.
Featured
Phoebe & Rich's Wall-e Progress Pics
G.day everyone, Here are the progress photos. will add to this post as we go along. This and the next one are the same shots as in our...
question
Auto Position And Stepper Servo Skills
My question is does the Auto Position skill work with the Stepper Servo skill? I was asking this question because I was thinking about replacing some of the joints in my Inmoov build with stepper motors with gear boxes. I would want to make sure I would have the same level of control.
2
732
smiller29 |
question
Control Ubtech Alpha Servos With The Ez-B V4?
Hello, I have a question . I have these servos in my robot and have now bought the EZ-B V4. But if it does not get to work, can...
121
16 k
Nomad 6R |
question
Pulling An App Into Blockly Page
Id like to have apps like the conversation app be able to be pulled into a Blockly page. This would save a lot of room on the page and would help to keep...
2
594
Automation Man |
question
Best Way To Attach Onboard Computer To EZB V4
All the upgrades and changes this past year or so to EZ Robot and Synthiams ARC software (Used to be ARC) has left me behind a...
34
3 k
afcorson |
question
Blockly And Communication
first question: when I installed the application, i put that i was comfortable with programming and that i could therefore use python, which is the case, but I would also...
2
505
Synthiam Suppo… |
question
How To Design Custom PCBs
In my Inmoov project I need to develop some break-out PC boards for the signal lines and power to different parts of the robot. I have seen others that have done this...
22
2 k
smiller29 |
question
Python Servo Control
How to start using python in ARC? Could not find how to create and run python app in the ARC. Ta
21
2 k
Gale |
question
ARC And How It Uses My CPU
This question stems from my worrying about my little Rock Pi X not being powerful enough to run my complex robot smoothly. I have the ver B, 4GB/128GB model. I also know that the Intel Cherry Trail quad core processor Z8350 is an older CPU at about 4 years old and Ive read in reviews that it has trouble running process demanding programs. I also...
5
740
DJ Sures |
question
Iotiny To PC USB Connectivity
Ive sent this question into EZ Robot but thought I could get a faster answer here. Is the IoTiny able to connect to PC through the PCs USB port and the Camera port like the EZB v4 can? I see this on EZ Robots website but I dont see how to set up the IoTiny to drectly connect to the PC: Quote:The EZ-B v4 Smart Robot Controller and IoTiny v4 may be...
14
762
Dave Schulpius |
question
Looking For Compatible EZB Camera Cable
Does anyone know of a cable I could buy domestically to the US with connectors that is compatible with the EZB camera port? Id like to find a...
17
2 k
Dave Schulpius |
question
Audio To Servo Mouth Movement
Do you have a shield that turns audio to servo movement similar to the famous scary terry skull movement ?
1
637
DJ Sures |
question
Cannot Get Servos To Respond Via Arduino Mega
Hello, I cannot get my Ardunio MEGA to control servos in my Inmoov via USB. I have followed the instructions closely multiple...
8
795
elektrophunktr… |