Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Send robot status alerts to iOS, Android and Windows via Pushover.net. Configure User/App keys to notify on low battery, stuck or task events.
Featured
Magnus: a 6 ft, 300 lb humanoid using wheelchair motors to drive tank treads; builder exploring E Z Robot kit and sharing photos
question
Hitchbot The Hitchhiking Robot Gets ‘Royal’ Welcome In Victoria
HitchBot made it to Victoria BC www.cheknews.ca/hitchbot-the-hitchhiking-robot-gets-royal-welcome-in-victoria/ www.cheknews.ca/popular-social-media-robot-hitchbot-visits-first-nations-on-vancouver-island/
2
3 k
jstarne1 |
question
February Orders?
Anyone got their Robot Kits? I ordered mine at the beginning of February 4th. Any news guys? Did anyone got theirs?
1
2 k
Rich |
question
Here No Sound
i made the app from six and i included the soundfile bbrr,but i dont hear it on the phone.
8
3 k
Nomad 6R |
question
File Into Where?
does this file needs to be in directory or so?
6
3 k
Nomad 6R |
question
Download My Copie
can i download this to my android?
9
3 k
Nomad 6R |
question
Bug Discovered In Sound Board (Pc)
I've found a possible bug with the Sound Board (pc). As you know you can use .wav or .mp3 files in a sound board. I have two issues: 1.) By default the file selection is set to .wav, but the file list of any given folder will show both .wav and .mp3. It appears that only when selecting .mp3 in the drop down is the scope narrowed to .mp3. Likewise...
0
3 k
JustinRatliff |
question
Ezb4 Kit On Ebay
For those who can not wait. It was fun just reading the back of the box. July 31 Manufacture date. EZB4 kit
20
7 k
Dave Schulpius |
question
3D Printing Question
Hi, I wanted to know if anyone has has experience printing EZ bits. I downloaded the STL files. I found that they require supports. Then of course, you have to remove the supports. This leaves a messy surface. Without supports my Replicator 2 (using PLA) just spews filament out. I have leveled the build plate. Has anyone had experience with this?...
10
4 k
tom.caine |
question
Why Is There A Limit Again On Recent Discussions In The Community Forum
Why is there a limit again on recent discussions listed in the community forum again? If I'm away for a few days the posts just scroll past the end and they seem lost forever. Am I missing something?
11
4 k
chrissi |
question
Auto Position Movement Panel
Little puzzled on the Auto Position Movement Panel. I total get Modified Servo Movement control, I love it for driving my 2 wheel servo robot. I understand mostly the Auto Position control. What I struggle with it the Auto Position Movement Panel which is like a combo of the two. For driving the robot around, I don't see where or understand how I...
6
3 k
JustinRatliff |
question
Isn't It About Time For Another Update?
Is it not about time for another Update? How about specifics like: We had a total of 6500 orders. We are on order# 4200. etc. Without Updates, waiting is getting old. Thanks, Mel
69
13 k
CochranRobotic… |
question
Controlling A Kangaroo With The V4
For Dave and Richard and anyone else who is interested, here is fully working and tested code for using the Kangaroo (with bi-directional comms) via the...
30
8 k
Dave Schulpius |