Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Control up to 99 servos via Vx virtual ports over serial (Arduino/custom firmware), integrating with ARC for scalable servo management.
Featured
App-controlled Mt Freeze suit with blue coolant hoses, LEDs, EL-wire-wrapped gun, illuminated mask and phone chest controller
question
Pinball Machien Haha
bzzss goes wel ,i see a pinball machien. who is winning?.
9
3 k
Herr Ball |
question
Will ARC Accept Python Scripts?
Just curious to know if EZB will accept Python scripts.
8
3 k
Robot Doc |
question
Robo Brain
Hey everyone, I found this article that you guys might find interesting. I haven't seen something similar on here so I though I should share. Also maybe something we would love to see in ARC. Robo brain. Cheers
0
2 k
budel0 |
question
Watsh Ez
does anyone has the link for the watsh you can use whit ARC?
4
3 k
Nomad 6R |
question
Here Is Something I Would Like To See
I would like to see my robot, when it is not busy, and maybe overnight , to hook up automatically to the Internet and start downloading information that it will put into it's database. I think some people are already doing this. But, I would like to know HOW. I would also like for the EZB to have a Wikibot program module. That would be GREAT! Tell...
5
3 k
MovieMaker |
question
Hard At Work
I see DJ is hard at work coming up with new ideas
4
3 k
Wolfie |
question
Making New Tires For Your Robot , Omnibot 2000 In This Case
Ok so i have a few people who want me to cast them omnibot or 2000 tires. The process is fairly simple...
8
4 k
jstarne1 |
question
Sophisticated Rfid Access Control System
Hello all, Once again I might have a stupid question. I’m currently trying to make a sophisticated rfid access control system. So far I have a Parallax RFID serial reader set up on a Parallax board of education running a basic stamp 2. It’s running a simple code to read the numbers of the RFID cards. In ARC I set up the serial PC terminal and I can...
4
3 k
airwave1206 |
question
Power 1501 Mg Servos
Can anyone tell me if these are continuous rotation servos?
8
3 k
RoboHappy |
question
Is It Possible To Convert The Ezb Camera To Usb. Those Ribbon Cables Don't Want
I guess I need an adapter or maybe I can simply wire the...
11
5 k
Dave Schulpius |
question
Is It Possible To Reboot The Ezb 4 With Software
It seems that the EZB uses conflicting IP addresses. I need to change it to another IP. Or something. I need to change to Client Mode and I have the EZB 4 installed in the robot already. Lots of work to get in there and reset it. Hopefully, this will be an option. I have my VNC setup on the same IP address. And, I cannot use both at once. I use my...
3
2 k
MovieMaker |
question
Pins On Ezb V4
Question. On the port D0 for example. There are red pins, black pins, and white pins. Which of these are Ground, Vcc, and signal. thanks
4
2 k
dbeard |