Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Use camera-detected printed cue cards (direction, pause, start) to record and run stored movement sequences for ARC robots.
Featured
Enhance 'Elvis Alive' WowWee robot: repair startup, add rotation pedestal with EZ-Robot lotiny controller and HDD servo for song-synced realistic...
question
Can't Load ARC
I went to update and during the installation I get a message that the object already exists and it cancels the installation. I tried to uninstall but it is not there anymore. I tried to download ARC again and the same thing happens.
21
5 k
Rich |
question
Omnibot
what is the size of the screen mounted to omnibot? how did u connect it to the ez-b?
3
2 k
Rich |
question
Webserver
is the webserver page only to be seen when a ez-b4 is connected to your pc?
21
5 k
Nomad 6R |
question
K-9 Soundbites
Hello all, i am sad and happy in equal measures. Traxx has been retired, due to too much torque being applied to the servo's attached to the tank tracks (maybe only temporarily, but retired...
4
3 k
mgodsell1973 |
question
Must I Be Tethered To A Computer/ARC
Hello , Quick question for you all... Let's say I've written all the logic and functionality and it's working as expected. Can I disconnect the ezb from the computer and allow the robot without and additional input?
4
3 k
RoboHappy |
question
Question On Power Supply?
Hello all :-} I am doing some testing with the V4 on my work bench tonight and instead of using batteries I was wanting to use a power supply adaptor. But before I do, I need to know if the power adaptor I have will work, without destroying the V4? INPUT: 110-127V 60Hz 0.25A OUTPUT: 12V 750mA Will this work without hurting anything? I would...
8
3 k
robotz12248 |
question
Toymaker I'd Like To Talk To You
Hey Toymaker if you get a chance would you send me an email? Thanks Chris [email protected]
1
3 k
thetechguru |
question
How Do You Travel With Your Robot?
I am thinking of taking a trip across the USA. To see my son who is 3,600 miles away. Take my laptop with ARC and projects. Take my tablet with ARC...
10
4 k
Stika |
question
Speech Recognition
I having a problem with microphone level setting under the setup microphone property from the speech configuration .Every time i open my project i noticed that the microphone level shows level 0 under microphone properties.What do i need to do so that microphone listen level stays were i set set the slider..Typically i have it at 80. Windows 7 pc.
3
3 k
DJ Sures |
question
360 Camera View
I was reading a post about someone trying to use 360 degree rotation with a servo for the camera..I saw that DYSON new robot vac uses 360 view with a camera facing up at a curved mirror assembly.Has anyone tried that with EZB camera..
0
3 k
rb550f |
question
Copy And Pasting Scripts
Rookie question. I can't copy and paste a script into another one, is this possible to do in ARC? I highlight the script I want to move and right click but nothing happens.
4
3 k
rb550f |
question
Can I Visit Ez-Robot In Calagary?
I am just wondering if i can make an appointment to visit EZ-Robot? I am not getting responds from the phone, email, or the forum. I am thinking if there are a more efficient waywsto establish some sort of communication with EZ-Robot?
6
2 k
doitdoit |