Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
4-series bar chart for real-time sensor comparison in ARC; set titles, values, RGB bar colors and conditional coloring via EZ-Script.
Featured
Convert a thrift-store RC car into a fast robot using salvaged motors, an Easy-B controller and H-bridge for a cheap, floor-ready hack.
question
Wiring Specification For Extensions
Does any one know how to add extension wire to the servo wire connector without cutting or modifing the black clip end and does any one know if the...
18
5 k
Andy Roid |
question
Servo Horn Adapter Installation
So I hay my servo motors mounted in place so I can install the servo adapter horns but I don't have any idea what these rubber garments and brace garments are...
5
3 k
Linux robot 9… |
question
Camera Device Visual Options
I use a few EZ-Robot video cameras for my different robots.. the design of the camera allows not always the installation in the correct position.. and my problem...
7
3 k
olegodo |
question
Best New Robot Movie : Automata
I just got done watching this awsome 2014 movie about robots that oddly enough look very similar to the inmoove robot just with legs I would love to see a...
21
9 k
Linux robot 9… |
question
Press Of A Button.Led
I have an LED magician and I'd like to be able to control the routine and the speed using ezb. Doable? If so how do i set it up in ARC. How do i connect it to the EZB? The manual discusses using a micro controller at the bottom of the manual.
15
5 k
fxrtst |
question
Myosaurus Rex
here's another feather for myo users.there is also mindcraft.
0
3 k
Nomad 6R |
question
Can I Use Httppost Or Other Triggers For Octoblu? (Newb Question)
I am doing some playing on a machine-to-machine called Octoblu. One basic event trigger is HTTPPost to a specific URL. Can I use this command? If I cannot, is anyone else using Octoblu? If so, please contact me to exchange info. Fair warning, I am NOT a programmer, I am a hardware engineer, so even the most obvious answers to you may be great...
0
2 k
lamachine |
question
I Finally Got One
So I finally ordered my very own V4 development kit, and was happy to receive it the other day. Nice packing, and have already powered it up and connected to the computer with ease, amazingly. The only thing I'd have to say I was little disappointed with, is that the camera and the ultrasonic sensor do not arrive in their own plastic enclosures,...
6
3 k
sgavit11 |
question
Anthony-Xlrobots
Anthony-XLRobots: if you find this post can you try to contact me . I have decided to jump in to the 3d printing as well. I really respect you and have high regard for you advise. My email is [email protected] if its free to you , you can call 931 - 368-4190 . Ask for Hippie.
0
3 k
Luis Vazquez |
question
How To Add Project Robots To Ez-Robots On Profile
i have been working on my omega project for about 2 1/2 months now and i have yet to figure out how to make a ez-robot...
5
2 k
Steve G |
question
Network Question:
Ok, here is what I have: The ports are: Router 10.0.0.1 Desktop 10.0.0.2 MagicJack 10.0.0.3 EZB 4 (Sally) 10.0.0.4 I have everything going into the router and then going to the Internet. I have two wifi connections. One is for the Internet and one is for the EZB. If I hook up for the EZB, I loose the other connection. I guess my question is: How do...
35
6 k
MovieMaker |
question
Robots On Ebay
Vintage R.A.D. 1.0 listed on Ebay R.A.D. 1.0 $69.00 $19.99 Shipping R.A.D. 2.0 R.A.D. $80.00 free shipping
1
3 k
Doombot |