Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Analog joystick UI to control any ARC movement panel via mouse/touch-configurable dead zone, max speed, center-reset for smooth robot motion
Featured
Convert an I-Cybie dog to EZ-Robot/EZ-B v4 with servos, camera and sensors, documented build and Synthiam ARC integration.
question
Free 3D Sensor Seminar
I partner of mine that I worked with robotics with over the past 10 years sent me this. Thought I would share it with you guys. Make no mistake its going to be a sales pitch , but you never know what you might learn along the way. COMPLIMENTARY 30 MINUTE WEBINAR: An introduction to using 3D sensors for inspection applications In this webinar, our...
1
2 k
69developer |
question
Unable To Connect Multiple Ezbs
Hi guys, I have asked this before but I am unable to connect multiple EZBs with one wifi connection. I have used the Wi-Fi client mode to connect the Six and Roli to my JD. However, after I connected the JD to the network, I am able to find the Six but not the Roli in the radar. Hence, I am unable to connect all three robots through one network. I...
4
3 k
mankental |
question
Glyph And Pose+Sound
hi is it possible to use a pose + sound while using a glyph?
8
3 k
Nomad 6R |
question
My Battery Is Low
hi there, Im working with the EZB-4 and 21x servos + a lot leds, camera and sensors.. the robot needs a lot power in action. in the same second If my robot says: "my battery is low", he collapse.. I have no time for a reaction. its not good for the optical look.. I dont want scratches.. or a broken arm.. you know. So I need to find a way...
29
6 k
Smarty |
question
Array Entry Format
I am trying to write an Array of ControlCommand scripts but I get an error message when I Run it. What is the correct format for this kind of entry? Thank you.
10
4 k
JustinRatliff |
question
I Just Bought Jd On May 3 And I Live In Ambler Pennsylvania How Long Should It T
I just bought it and I live in the U.S. In ambler pa how long should it take if I got expedited shipping
8
2 k
Jake23450 |
question
Ez Servos And Voltage
Hola Hopefully this is easy. Can the standard EZ servos (builders kit) safely run at 5 volts (but plenty of amps)? Thanks, D. Scott
3
2 k
Mulberry |
question
Ez-B V4 - Servos And Power Supply
Is there any documentation on how much power/amps the EZ-B V4 will supply for servos? I see a lot of you are using up to 20+ servos (and some are the big...
9
4 k
Steve G |
question
Inmoov With Bosch Motors
I have decided to jump into 3D printing and build a version of the Inmoov robot, here is the printer that I am going to buy, it looks a good spec....
33
10 k
Steve G |
question
Legs Six Almost Reddy
dj&team got my servo's and endparts rotation servo's today. all working and callibrated allreddy. thank you for with ez robot will it be,hehe
0
3 k
Nomad 6R |
question
Cant Get Multicolor To Work
the multi color doesn work for me.the voice is hardly to hear. tested diff collors,always full batt.am on win7 i use two colors red and blue,only in color setting red...
5
3 k
Nomad 6R |
question
Microsoft And Arduino
It’s a special day for the Makers’ community. Massimo Banzi is in San Francisco attending Build Conference, the biggest developer event of the calendar year for Microsoft and...
16
5 k
jstarne1 |