Robot Building Questions
With Synthiam ARC Pro, you're not just programming a robot; you're shaping the future of automation, one innovative idea at a time.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
WebSocket client for ARC: open/send messages, store server responses in a variable, run a response script, and track connection status.
Featured
Control Target Bot in Synthiam ARC: EZ-Script moves D7 servo, reads D8 switch (GND+Signal, no resistors), triggers hit routine and 'Nice Shot'.
question
Roomba Hack - Uart Questions
Hi, I have finally found a Roomba 620 I wish to use as a robot base. Everything works great, thanks to @RichardR examples and some very interesting threads. Now I...
15
5 k
DJ Sures |
question
Multiple Screens On Mobile App
So I'm running out of real estate on my tablet for my EZB mobile app. I was looking for a way to have an extra screen that I can toggle between on the same mobile app, so I can have one set of buttons on one screen, and another set of buttons on the other screen. This is not an issue on the PC edition, as I can use the Script Manager and run as...
16
5 k
R1D1 |
question
Objectdetect And Facedetect Together
Hello, i have a short question if this is possible: to explain want i want to do, this script i think eplains everything: if ObjectDetect Say ("Hallo" + $CameraObjectName) endif I want to run the face dectection and the object detection together. If a saved Object is detected the robot will say "Hello Object". In the Moment i...
3
3 k
DJ Sures |
question
Using The B5t-Hvc Vision System
For testing I built a temporary housing for the B5T which also allowed me to add a tripod mount which makes things easier I have 4 faces currently registered...
11
5 k
nanomole40 |
question
Robot Mimicking Facial Expressions
You can watch it smile and make cute faces
5
3 k
WarPig |
question
@Dj-What Is The Link For The O-Scope You Use?
I want to get an O-Scope to use for troubleshooting. I seem to remember you have a small o-scope that you like to use to look at servo signals but I can't find the forum discussion where you gave the link.
1
2 k
Jeremie |
question
Set On/Off On Ssc-32
How can I set the virtual ports on the SSC-32 to on or off? Doing Set(V0,On) doesn't do it which I don't get as you can control a servo using Servo(V0,90), or, like servo speed, is this not supported either?
8
3 k
Steve G |
question
Trouble Connecting 2 Ezb's
I'm trying to connect two v4's in one project, but no dice. I know someone had this trouble before, but can't find the thread. They are both set to client mode, and the...
29
6 k
Steve G |
question
Automating A Rc Car
I have a RC rock crawler that I would like to automate and turn into a Robot . If I but the EZ-B v4 Developer Kit will I be able to replace my receiver on my car with the Ezb-v4 unit and hook up my steering and ESC servos to run and stear the car through the programming to the . The car has 7.2 v Battery system on board which come through the ESC....
7
3 k
DJ Sures |
question
Ssc-32 Speed Control
I'm currently installing and testing my new SSC-32 and testing servos using Servo(V0,xx) script commands which work great, and I'm trying to get a "connection" init script sorted to set virtual servo speeds on start up, but can't figure out how to control speed. A take it that the "ServoSpeed()" commands are not supported for...
9
3 k
Steve G |
question
Ezb V4 Short Circuit
I have a problem with my EZB. Its connected to a JD-head. That means 2 servos, rgb Eyes and camera. Powered with a 2cell lipo with a 2 Amp fuse inline. I had the EZB powered up and programming, shut it down to eat dinner. When I got back i plugged it in again but it didnt boot, 10 seconds later the 2 amp fuse was blown. I unplugged everyting from...
2
2 k
James Graham H… |
question
Longer Programming Time
i made a video how you can use an extended batt 2200 or 5000MaH with 12 servo's .you will only see the female jack. tell me what you think plzz. 5000mah 2200mah
5
3 k
Nomad 6R |