Robot Building Questions
Join the ARC Pro community and gain access to a wealth of resources and support, ensuring your robot's success.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
WebSocket server for ARC: accepts clients, stores messages, runs per-message scripts, tracks connection status, supports debug, needs Windows admin
Featured
Custom EZ Robot Ducki scaled for micro‑servos, 3D‑printed robo-duck celebrating EZ‑Builder, EZ‑Bits and EZ‑B v3/v4 with enhanced facial details.
question
Body Frame & Head Change On: Ez-Robot Jd
Hi all & DJ Spent a good amount of time researching what Robot to purchase, choices were; 1. NAO 2. Robi 3. DarWin 4. EZ-Robot JD 5. Pepper Happy to announce my choice was EZ-Robot JD!:-) Now; we will be working with children who have extream hypersensitivity & ADHD, teaching them how to make apps & run JD. Using JD with children who...
4
2 k
Clip2Trigger |
question
Wall-E From Junk
Remember the guy who made a DJ robot from flattened plastic water pipe? Well, he's still at it, making a Wall-E from stuff and such. A Wall-E from junk seems kinda fitting to the Wall-E meme, actually. https://www.instructables.com/id/Robot-real-size-LowCost-walle-made-from-water-pipe/
3
3 k
DJ Sures |
question
Battery Not Charging
after setting it up, and testing it. the next time I wanted to continue my test the battery is unable to charge. the 3 red LED keep on blinking. I disconnect the other connection...
6
2 k
Jit |
question
How To Control Dinamixel Servo Type Rx-64 With ARC
I have a servo dynamixel type Rx-64 with 4 wire (vcc, Grn, D-, D+) I am confused to programming using ARC , do the servo...
4
3 k
Steve G |
question
Low Battery Alerting Incorrectly
I've had EZB4 for about a month now and has been working great until today. In the Desktop Connection settings, I changed the Min Voltage for the Battery Monitor to 5.2, as I'm powering my EZB with a 6 volt battery. I did this a few weeks ago and everything has been fine. Now today, when I'm using my Mobile Interface, I keep hearing the "My...
3
2 k
R1D1 |
question
Ez-B V4 Wi-Fi Robot Controller
I am using the EZ-B v4 Wi-Fi Robot Controller to replace the receiver in my RC car and make it into a robot . The 7.2 V battery powers both the motor and is connected to the ESC which then plugs into the receiver and powers the receiver also . The other servo for steering is also powered by the connection of the ESC to the receiver . Can you tell...
11
4 k
bhouston |
question
Jd - V3 Or V4 Controller?
I bought JD when he first came out! I am seeing some v3 & v4 controller info. Has EZ-Robot already changed to a v4? How can I tell if mine is the v3 or v4? Does the v3 still work with all the program upgrades? Thanks.
3
2 k
michaelc |
question
Servo Release Not Working Using (D#,0)
@DJ and Jeremie. I've been setting up some servos, and I've noticed that the servo release using (for example), Servo(D5,0), the zero is now being treated as a servo holding position as it was before the introduction of zero being a servo release. I am using the latest ARC version, (2015.09.00), and it was working a few weeks back. I also tried it...
17
5 k
Steve G |
question
Lipo Battery 7.4Vdc 1300Mah To Ez-B V4
I purchased the EZ-B v4 Developer Kit a few months ago and realized that I would need additional power supplies. I went to EZ-Robot store and...
8
3 k
DJ Sures |
question
Jd Robot
Hello, EZ-Robot Company, we have one problem with JD model - legs,while trying to stand up, bend backwards, help us please. Stanislav.
2
2 k
Gosha |
question
Longer Waiting ?
new text chips in 7 to 8 weeks does this mean longer waiting?
2
3 k
Nomad 6R |
question
Ez-B 3 Support
Hi, my name is Sofiane Larbi, and I'm 12 years old. I bought the developer kit a while ago, but only recently have I had a Windows computer to control it. My friend and I managed to connect...
5
2 k
sofianef1110 |