Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
EZB UART parser and Serial-TCP bridge to connect EZ-Robot cameras via Teensy USB, enabling ARC camera control and USB-to-serial bridging.
Featured
Control Adafruit 16-channel PWM/Servo Shield with Synthiam ARC to drive multiple servos seamlessly.
question
Cosmetic Change
i wanna have that legs of six desame is as the right side. what is the degree then?and need i to change anything els. its pure cosmetic
11
4 k
Nomad 6R |
question
Multiple Ez Networks Appearing
This is related to a previous question but that seems to have disappeared from the forum (it has been a few weeks). Anyway :-) I'm showing multiple networks when I attempt to connect to my boards: EZ B V4-2A EZ B V4-0F It seems like one board will only work with one network. The other board with the other. I would think there should only be a...
3
2 k
Mulberry |
question
Ping Richard R Sabertooth And Kangaroo
Hey Richard R, a long time ago you sent me a link for the motors and wheels that you and BHouston use. my question is can a sabertooth and kangaroo operate this motor or do I need a pots or some sort of encoder for it to work. thank you
4
3 k
Redzone |
question
Hmc5883l Triple Axis Magnetometer Help
Hi So finally I got may HMC5883L Triple Axis Magnetometer through. But I can't seem to get it working and there doesn't seem to be any reference to it only a dual axis one. All connections were obvious so I know they are right. It's connected to the 3.3v not 5v. I can't say much more than that. I tried using the dual axis options but it only...
19
4 k
elfege |
question
Clockwise Set Up
could there be a reason to set up the leg from six all clockwise. i see a pic it was diff earlyer.
5
3 k
Nomad 6R |
question
Make An Engraving Is Really Easy With Diode Lasers Installed On A 3D Printer
Here our new video footages that we made We introduce WanHao DuPlicator i3 engraving machine
8
2 k
endurancerobot… |
question
Battlebot&Battleflipper
are these one and desame ARC? i only see battlebot in the downloads. thanks anyone
2
3 k
Nomad 6R |
question
Diagmostic Report, Following Directions On How To Report Wi-Fi Question With Hp
Name: Wi-Fi Description: Qualcomm Atheros AR9485 802.11b/g/n...
3
2 k
DJ Sures |
question
Halloween Is Coming Soon
Hello To All, This time of year my old plc controllers and arduino ends up at my friends Halloween Barn. I program a number of displays for our friends, both fiends and...
38
7 k
Andy Roid |
question
Reset And Connect
with the new batt wil i need to reset connection or calibrate? roli jd six
4
3 k
Nomad 6R |
question
Camera Detection Script Help
Hey guys. A little help is needed with a script. I am helping a friend out setting up their v4 camera and doing some object recognition. What my friend want's is, if nothing is recognized after 10 seconds, a script or part of a script runs. Here's an example of what is needed... waitforchange($CameraObjectName,10000) sayezbwait("I have...
8
3 k
Steve G |
question
Help Using A Returned Position Value From Kangaroo In Ez-Script
I'm needing some help figuring out a way to use a returned position value from a Kangaroo X2 in a EZ-Script. What I want to do is take that value and use it in an "If"/"ElseIF" statement, do a couple "Less Than, Greater Than" comparisons and send the script to one of two sub sections. The problem I think I'm having is...
4
3 k
Dave Schulpius |