Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Duplicate and synchronize commands from one master EZ-B to multiple slave EZ-Bs for simultaneous, mirrored robot actions.
Featured
4WD sci-fi vehicle drive with EZ-Robot 360 servos, independent 4-wheel steering, mobile app control and IO Tiny; tight turns, speed tuning issues.
question
Batterie Safety
wel i had a bad week with batts.so i wanted to tell my experiants. the batts we use here has a sort seal ( stamp ) that warns you , for excample is bad or worn out.on one side is a sort off...
2
3 k
Nomad 6R |
question
Is This Warenty
i make another topic about the batteries cause this can be a case of warenty. the chargers says output 12 volt,i get 12.22 volt .i think thats ok the charger gifs 11.20 something to low.so i look at the batt in jd win8, and it wil not charge,green led goes out.i also see some punctering in the batt, from i gess factory.i made a video.the balancers...
43
7 k
Nomad 6R |
question
Stuck On Wii Remote Screen
I just installed ARC on my iPad to control my new Roli Rover and went to the Wii Remote screen with the virtual buttons (mostly a white background). There appears to be no way to go back to the ARC page and I'm stuck on this page...I can hit the bottom button on the iPad and get the normal iPad screen, but when I re-select the ARC icon, it goes...
2
2 k
Norton82 |
question
Halloween Project The Great Madame Ninndo
Here is my Halloween project. "The Great Madame Ninndo". My Adventure Bot is lifeless right now because he gave up his EZB for...
12
4 k
Andy Roid |
question
New Idea For Roli
i changed the wires from the arms,looks much better. also 2 slots more would be better in the front. you can use normal arm then whithout the problem choulderservo heating up.
8
3 k
Nomad 6R |
question
Wireless Cam On Ezb 4.0 Digital Port Question
update 02.11.15 #### resolved by myself How to programming ON/ OFF for the original EZB 3.0 2.4G Wireless Cam on EZB 4.0. Step 1:...
15
4 k
Rich |
question
Two Months Ago I Posted Robot 101 , Got The Answer I Was Looking For And I Clos
I am looking for the delete button ...... my postings from...
4
2 k
53stude |
question
Flipping And/Or Reversing The Camera Via Script Commands?
@DJ, I have a project that uses a Roomba to keep and eye on the cats (and to break up the odd fight as well)... The Roomba is powering the ezb through a step down voltage regulator, so the ezb will (hopefully) be on or powered 24/7... I also have a pan and tilt servo camera setup on the Roomba. Now when the Roomba docks the camera just stares at a...
3
3 k
bhouston |
question
Monster Setup Help
Hey guys! I was wondering if maybe you could help me and my dad in the setup of this utter monstrosity as we would really appreciate it. Thanks.
3
2 k
Steve G |
question
Controls: Auto Position, Auto Positiion With Movement, . Which Do I Use For A Se
I've finally started tinkering with ARC. I've gotten my...
4
3 k
thetechguru |
question
The Tutorials Should Have More Links Across The Site
I'm reading one of the tutorials, called Servo, and it says: Quote:The EZ-B v4 has high accuracy which results in 180 servo positions. The EZ-B v4 can control 24 servos simultaneously while it performs other various user specified tasks. If your servos draw more current then our specification sheet defines, the EZ-B may run out of power and reboot...
1
2 k
DJ Sures |
question
Fuses, Power Protection For The Ezbv4
Hey guys, long time since I've been around. Just getting to fooling around with my EZBv4. Those are pretty harsh terms of marking a thread as a...
5
3 k
allanonmage |