Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
LLM-powered Autonomous AI for ARC robots: vision, speech, movement, animations, multi-step task planning, evolving drives, and multi-model support
Featured
New robot showcased again, enjoy and laugh at my latest robot.
question
Omni Wheels?
How would you use Omni Wheels on a 'Bot? the 2 in one wheels that can even move sideways... Thanx!
3
3 k
aika.robotic |
question
Interesting Omni Wheels Info.
DAGU NEW PRODUCT-OMNI WHEEL VIDEO There are a lot of cheap omni wheels on the market now but basically they all have plastic rollers which prevent them from...
4
4 k
aika.robotic |
question
Smart Arrange Automatically?
Is there a way to programmatically have ARC run "Smart Arrange" via a script rather than going to the Control tab and manually clicking it? My controls always auto load off screen and only "Smart Arrange" fixes the issue.
4
3 k
Stiko |
question
Dimension Engineering 2X32 - Which Control Is Better?
I have a 2x32 Dimension Engineering motor controller (actually have six 2x60's, two 2x25's, two 2x10's). I have used them to control wheelchair motors for robotic projects. I love the EZ-B application when using the Servo app (mobile) joystick which is VERY smooth. However, when controlling the 2x32 using RC mode, it responds great, but when the...
19
4 k
DJ Sures |
question
Can I See How Strong Is The Wifi Signal?
I have try to find a answer for my qestion. When i use my robot outside from my house, the robot disconnect. Now i use a extra WIFI Dongle. But how far i can go? Gives a script or a option for display the signal strenth? And my second question is, how i can change the EZB from Clientmode to AP Mode back with the Webserver? I have the Settingsite...
13
4 k
Stiko |
question
Speech Recognition
I am using speech recognition in my robot Antonn. I have about 50 commands and responses. Right now there are 4 basic topics these commands fit into. They are introduction conversation responses where the robot talks about himself, conversational responses for verbal interaction, Alexa command interaction and commands which operate digital outputs....
4
2 k
Andy Roid |
question
Error In Auto Position After Creating New Frame Exporting To A File And Importin
Hi I Try to import new frames I have created for JD Project...
7
4 k
Jlucben |
question
Save On Exit
Is there an option to automatically save a project on exit? If not can a script save a project?
4
2 k
jmp23834 |
question
Grip ,Servo Out Of Service After Calibration Fine
I am french, and the grip servo from jd is out of service after fine calibration?
3
2 k
jeanluc.pohl |
question
Heathkit Hero Jr + Ez Board
Hello all, New member here! I just acquired a working Hero Jr and was wondering whats would be the best way to connect an EZ-B 4 to it? Thanks, Amado
10
4 k
Mickey666Maus |
question
Companion Robot
Hi everyone, as im going to be bringing 2 vintage robots into the 21st century, i am wanting also to eventually build my girlfriend a companion bot. She lives overseas in asia, and it's...
2
2 k
Toyhackrobotic… |
question
Ez Lipo Balancer/Charger
since I had quite a severe Lipo battery explosion a few weeks ago that nearly set my place on fire,due to my lack of understanding charging modern battery packs. I have made it my mission to research everything about all battery types Nickel cadium,Nimh high power and Lipo high power. I do have a few older nickel battery packs that I have re...
1
3 k
robo rad |