I was motivated tonight so I decided to EZ-B my Robosapien.
Took about 20min total.
He's up and running via Wii remote.
I'm running the EZ-B on an external battery for now because the Robosapien batts were low and need replacing.
Added a fricken laser beam for giggles.
My plan is to build a box around the EZ-B board and dress it up to look like a jet pack.
I'll add a camera down the road.
By Lumpy
— Last update
Discover more robots
Steve's Eddie. The I-Cybie & Synthiam Mongrel Robot Dog
Convert an I-Cybie dog to EZ-Robot/EZ-B v4 with servos, camera and sensors, documented build and Synthiam ARC...
Deuel18's Oculus Rift Is Out, Any Ideas?
Control EZ-Robots using Oculus Rift and brainwave interfaces-explore hacking, integration methods, and control options.
Linux's Omega 2.0 Bipedal Stage Concept
Omega bipedal concept design with customizable arms, possible XLRobots fembot arms, and a planned five-finger gripper.
And to think I'm leaving my Robosapien for when I have no motivation, funny how that works
LAZORZ, pew pew pew
A nice touch.
WOW nice job so far LUMPY ,i have 8 of them and one it a rare blue one
I have a roborad PROJECT going on .like one done by BRET only some changes and using a bigger robosapien V2 and making 2 of them,
my robosapien v2 project
what is the external battery voltage that you are using
I use a 12V SLA battery in my RAD base and a step down buck transformer to get the voltage I need for Robosapien.
I'm running the original batteries in the feet and a 7.4v (500mAH) for the EZ-B.
My foot batteries were low and my EZ-B power kept dropping out.
I'll probably tap in and feed it some LiPo down the road.
My designs is same as BRET'S 12volt in a rad base,one is a party robot other is a party server.
Nice job. Got video?
RJ
Hi fellas. I have a RS V2 on the bench for wiring harness repair and all was going well until I ruined the 7 pin white connector that attaches to the harness for the right leg. Would you happen to know where I can buy one of those 7 pin connectors? I'm having a difficult time finding one. My last resort will be to solder the attachment pins to the wires and connect them individually without using a connector and that's far from ideal.
RJ