I have always loved the StarTrekVoyager Holodeck episodes of Captain Proton. So Retro and Cool. Created a tribute Robot to the Star Trek Voyager Captain Proton Holodeck Character. Started with a Meccano, stripped out servos and installed EZ Robot HHD servos and an EZB controller. Added a Plasma Disc, and controller, LED mouth and Eyes lights, PWM controller on feet drive motors, and body panels of foam board and PVC. InkJet printed Com Watch onto foam board with velcro wrist band, and a Dr. Who Screwdriver for a Laser Gun. EZ Robot claws with Meccano fingers. The unique servo (from a JD foot) allows the head to tilt extreme angles up and down, the way it is mounted. It moves down and back, like a cat, to up in your face. Bumped the shoulders out 2" (5.8CM) to give it a little wider stance. The Plasma Disc had no issues with the EZB while testing in close proximity, but caused interference after I mounted it. I got around it by activating the EZB first, then the plasma disc. I put a controller that only activates the disc after connection. The 1st video took a while to complete, with so many out takes. The loud thump noise on final shoot was actually my 2nd computer falling off the table. The video has a restriction that it cannot be monetized, but I do not have 1000 subscribers anyway, but you can subscribe if you like. Thanks Steve s
More robots by Steve S
Other projects from the same builder.
Steve's Navigation Test Robot With Intel Realsense T265
Navigate an iRobot Create using Intel RealSense T265 and EZB with Synthiam ARC for reliable visual tracking navigation...
Steve's James, Commodore 64 Retro Robot That Learns And Uses...
Revived 35-year-old Retro Robot runs on 7.4V LiPo with buck converter; Commodore BASIC learns 3D motions via joystick...
Steve's Marcus The Expressive Android
Marcus the Android rebuilt from a Wow Wee Elvis: 12 DOF, lifelike upper lip movement, rotating/rocking pedestal,...
Discover more robots
Robots the community built with Synthiam ARC. Get ideas for your next build.
DJ's Omnibot 2000
Omnibot 2000 converted with Synthiam EZ-Builder and EZ-Robot kit: servos, camera, speech, glyph vision, autonomous or...
Marv's 4Wd Project
Control a 4WD with EZ-B and Sabertooth via Synthiam ARC: serial H-bridge tuning, camera/Bluetooth plans, ultrasonic and...
Steve's Robot Captain Ann Droid
Captain Ann Droid: a faster, smarter robot built on iRobot Create using EZ-Robot kit, software and Bluetooth speech for...

great robot my friend
Nice videos. Love that meka!
By the way, does he walk?
Have the stl files to print some of these parts?
EzAng, He is powered by the original Meccano motors that I have added a H-bridge to control with PWM from the EZB. There are no 3D printed parts. Most are foam board panels that were cut with an exacto knife, after being traced from the Meccano body parts. The shoulder covers are from thin PVC tubes cut lengthwise in half, purchased at a hardware store. Steve S
Great work and artist eye for use with these items
what light do you use for the chest?
seen Captain Proton in Star trek, funny
EzAng, Here is a link, if it does not work, it is on Amazon-Plasma Disc. Plasma Disc Thank you for your comments. Steve S
yes, great video production, you and Will, fxrtst should team up
thanks Steve, I ordered the Plasma Disc.
can probably use it somewhere, lol
What ever became of you 7of9 borg ?
OMG, this is a scream! I love everything about this. Great robot and great video production. Funny thing, just a couple days ago I watched the movie (again) Sky Captain and the World Of Tomorrow. Your video reminds me so much of that cool movie.
Love the creativity you put into this robot. I'm glad you're back at!! Keep it up. You haven't lost a thing.