Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Discover more robots
Rb550f's Ez Robot Rover
Custom robot with clear dome head, EL tape neck lighting and ezb backpack repurposed from an alarm clock; updated photos...
Luis's Multiple Sensors On One Uart
Integrate a dual-axis compass, four HC-SR04 ultrasonic sensors and an Arduino Pro Mini with EZ-B4 for robot orientation...
Buratino's Basilio
Basilio 45cm 3D-printed walking robot with 26 DOF, external potentiometers for pose capture, seeking EZB/EZ Robot...
same here ,stuff and boxes robots avery where.:D
Can you use the MG996R 55g Metal Gear Torque Digital servo Motor?
Amazon https://www.amazon.com/4-Pack-MG996R-Torque-Digital-Helicopter/dp/B07MFK266B/ref=sr_1_10?dchild=1&keywords=servo&qid=1587516379&sr=8-10
EzAng
No,it only works with these servos!
https://www.amazon.com/-/de/dp/B0748BQ49M/ref=psdc_2234131011_t1_B073XY5NT1
hi mickey
amazon dont chip to belgium.these are from bangood are they useble?
servo's lx
Hey Nomad, yes they are good...I ordered from Bangood myself!!
Only thing is that it takes a long time to arrive!!
hi mickey
great .chipping about 3 weeks,i know.these are about same as the lewansoul i gess.
These are exactly the servos that I am using... You need a total of 14 servos to build ZOE!