Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Other robots from Synthiam community
Ezang's Mr. Conehead Monster
Mr. ConeHead Monster robot: 6 servos, 2 grippers, custom rear wheels and camera to see you - DIY fun by Angelo
Jstarne1's Omnibot 2000 , Rad 2.0 Vacuum Bot
Modding two Omnibots (regular and 2000) with two EZ-B kits; rad base shelved for noise but may return if drivetrain...
Mickey666maus's BLDC Control Odrive-For-ARC
Control Tarot 6S 4108 KV:380 BLDC motor like a servo using ODrive and Arduino with Synthiam ARC for closed-loop position...
glas bed too.and a uhu stick ??
the uhu stick is for getting the print to stick on the build plate ( glas ) and better finich,
glas bed
ok I will look into it, thanks
EzAng
Hey Nomad, how did the print come out...I am happy it worked for you!!
I made some instructions for the Head Frame, which holds the Oleds, Camera and Pi... Just to show the basic assembly!
Feel free to modify the design for ARC HDD Servos, looking forward to see your build!!
Let me know if you are running into any issues!!
mickey
still printing the head.will last till tomorrow .17 houres lol
Hi Mickey I have printed the neck parts I designed up and down right and left and I am printing the Original head slightly enlarged, as I am not using your suggestive eyes I will be using a mouth. The head has about 3 hours to go. I still have to design the mouth Mechanics, still just an idea. thanks again for giving us your files. this makes being trapped at home much more interesting.
Sweet!! So good to hear you guys are having fun!! I am really looking forward to see your ideas!!!
May the filament be with you!!