Profile Picture

cem

Country: United Kingdom
Member Since:

Latest submissions

question
Script Manager’ In Mobile
I have a lot of scripts for my InMoov in Script Manager’ and want to run some of them via mobile. As the Script Manager’ is not implemented in mobile yet! Any suggestions how to run the individual scripts, apart from redoing everyone in individual EZ-Script controls?
question
Supercaps On 3.3V Rail, Preventing Ezb To Connect?
@JeremieI hate to bring this topic up again, ( its been about a year ) :)Back last year I put two SuperCap rated 1.5f @ 5v in series ( 1.5f 10v ) on EZB's input Servo power ( 6v Battery ) to prevent brownouts and its been very successful, and worked well. ( Stopped brownouts ).But since converting some of InMoov's large scale HS-805BB servo's over...
question
Using Ez-Robot Hdd Servos Instead Of Hs-805Bb On My Inmoov
I'm experimenting with HDD Servos on my InMoov, using them in place of the HS-805BB to stop the buzzing under heavy load.I started with the Elbow servo and it seem to handle the weight etc, and no buzzing when holding up the arm, unlike when using the HS-805BB servos!Seems to work well.See quick videohttps://www.youtube.com/watch?v=bySzD2kxSSMI'm...
question
Iotiny Case
@ RichardThe Prototype of the Io Tiny case you did about 9 mths ago, is there any updated stl files, or are the ones in your posting the latest?While I'm waiting for my Io tiny's to arrive, I want to print out the case. ??ThanksChris.
question
Using Talk Servo With Pandorabots Plugin
Just been played around with pandorabots Plugin creating basic scripts for my Inmoov ( Data ), and noticed that I can't sync up the speech with Inmoov's mouth correctly, even when adjusting the 'talk servo' parameters settings.The 'talk servo' parameters I've setup in other scripts work fine and are in sync with Inmoov mouth, without going through...
question
Inmoov Head
Inmoov Head
My InMoov Project.Its taken about 3 weeks with breaks in-between and have nearly finish the head, also getting use to 3D Printing! As I...
question
Ez-B V4/2 Comm Upgrade Boards
Ez-B V4/2 Comm Upgrade Boards
My two V4/2 Comm Upgrade boards have just been delivered, please note they were packed up in a 'LiPo Balance charger' box.At first I thought...
question
Power Connection To Ez-B V4 Without Using Base Unit
Power Connection To Ez-B V4 Without Using Base Unit
Hi,I'm looking to buy a EZ-B v4 for my Hexapod, but don't want to use the power shellunit to connect the power as its to big. Is there a...
question
Inmoov Builders
Inmoov Builders
For folks who are interested, the parts for InMoov 'Back' have been posted on the InMoov website.It looks pretty good!
question
Cepstral Voice Effects
@Steve GSteve, I carried out your tutorial to change the voice effect in Cepstral, and it works GREAT!Before I found your tutorial I had contacted Cepstral, to see if I could change the voice effect to another device, and said it could not be done.Thanks for the tutorial posting.Much appreciated,Cheers,Chris.
question
Ziggy The Hexapod
Ziggy The Hexapod
I've got around to installing the EZB into my old Hexapod robot called 'Ziggy'Been playing around with the servo auto position control,...
question
Inmoov Builders ( Servos )
Hi InMoov Builders,Did you guys use the 2x Hitec HS805BB servos for the Head 4 axis, or is there any equivalents servos of the same size, the Hitec ones seem very expensive in the UK?Chris.
question
Flashforge Dreamer Vs Creator Pro
Started a new thread, sorry @bhouston for high-jacking your Inmoov thread. :)@RichardYou posted:>>>If I had a choice (which I did) between the Dreamer and the Creator Pro... It >>>would be the Creator Pro hands down... I took @Doc's advice and purchased >>>the Creator Pro and it has been an awesome printer.... SmileWhat was this based on?I keep...
question
18650 Li-Ion Rechargable Batteries
18650 Li-Ion Rechargable Batteries
Has anyone used 18650 Li-Ion rechargeable batteries before with the EZB.I'm using two in series to get 7.2V @ 3400ma, the ones I chose were...
question
Auto Position
Auto Position
Hi,In 'Auto Position' can the Servo position number in a Frame be displayed withthe value in the 'hundreds' units. example: Displaying 100...
question
Servo Offset Configuration
I've created a project in EZ builder for my hexapod with 20 servo's and did the servo offsets and saved the file.But every time a load the project it doesn't asked to load the servo offset configuration file, And I have to load it manually. Why is this?If I use an example project like 'Six' it asks me automatically to load the servo offset...
question
Ez-B V4 Order
Hi,I've just received my EZ-B v4 and other parts I ordered, which has ONLY taken exactly 1 mth from date of order, which is pretty amazing given all the bad Press on delivery dates, I've seen on this forum! :)I know these were for complete kits, and not for individually parts which I had ordered, but still its pretty impressive! One question which...
question
Heavy Duty Servos
Hi,What make/model are the heavy duty servos used in the hexapod six.I want to purchase the EZ-B v4 WiFi Robot Controller and create the EZ-bits via a 3DP if possible,and wondering if I can use the 'Tower Pro MG996' heavy duty servos, which I have already.Cheers,Chris.
question
Ez-Builder Mobile
Hi,Where do I find the iOS download for apple devices for the EZ-Builder Mobile, I can only see the download forAndroid. Although in the blurb it mentions for iOS iPhone.
No behavior controls for ez-builder have been shared yet.
No live robot hacking sessions have been shared yet.
No user tutorials have been created yet.
No apps have been created yet.
No firmwares have been created yet.
No 3D Parts have been created yet through EZ-Builder.