All Community Content
Unlock the true power of automation and robotics by becoming a proud subscriber of Synthiam ARC Pro.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Control Kondo KRS ICS2/3.5 servos via EZ-B UART; experimental, untested. Supports chaining, virtual servo ports, Release() and Servo() commands.
Featured
Robomannequin Eve: She's my first.
Audio
for ARCx
Azure Speech To Text Engine v2
Azure speech recognition for ARC using your custom subscription key for speech-to-text, billed to your Azure account.
0
2 k
DJ Sures |
Communication
for ARCx
Ezb Connection v3
Integrate ARCx with microcontrollers running EZB firmware to enable communication and control of EZB-equipped hardware.
0
2 k
DJ Sures |
general
Talking About 3D Printers
Hello, Is there any significance to the length of the Bowden tube in a 3D printer? My nozzle clogs up after about one hour of printing. I have replaced the nozzle and the Bowden tube, and I have also calibrated the bed, but there have been no improvements. Does anyone have any ideas on what might be causing this issue? Thank you!
8
632
Nomad 6R |
question
Best Way To Connect A 12V Servo To The EZ-B V4
@Athena, what is the recommended way to connect a 12-volt servo to the EZ-B v4? The stall current of the servo is 8.0 amps. How much current can the EZ-B v4 safely supply? Additionally, I want to ensure that the connection integrates well with the Movement Panels and other plugins in Synthiam ARC.
5
702
Athena |
question
Cant Find Ip Adres
Hi, I am having trouble locating the IP address of my new IoTiny. I believe it should be something like 192.168.0.???. It does not connect, whether Norton is enabled or disabled. Can...
18
847
Nomad 6R |
question
Can Not Build Robot
Hello, I am trying to start building a robot, but the instruction view says "Completed" in the top left corner, and I am unable to proceed. I have not set up anything yet...
11
737
Athena |
Scripting
Sketch Pad
Script-driven Sketch Pad for ARC: draw shapes, text, lines and faces via controlCommand() to visualize object locations, paths and robot...
8
5 k
Athena |
Servos
Lever Servo - 90 Degrees
Digital heavy-duty 15 kg/cm Clip'n'Play servo with 180 lever and metal internals for high-load robot joints and easy modular expansion
2
16 k
Synthiam Suppo… |
live hack
DJ's K8 Intel Realsense & Navigation
Test robot navigation with Rock Pi/x, Intel RealSense T265 & D435i, Sabertooth/Kangaroo using Synthiam ARC waypoints, renderer and...
7
4 k
Synthiam Suppo… |
question
JD Robot Rolling
I am curious if it is possible to modify the JD robot to enable it to roll instead of walking, similar to the functionality of the Roli Rover.
4
702
Nomad 6R |
question
Joystick Xinput Control
Is it possible to implement a Pause and Unpause feature for the Joystick XInput Control in Synthiam ARC? I have noticed that users frequently press additional buttons on the Xbox controller before the robot has finished executing the current script. This results in some chaos, with the robot attempting to catch up with the commands.
1
524
Synthiam Suppo… |
question
ACR Remote Password
@Athena, I can't remember the password I used for remote login from my phone. When trying to log in from my phone, where can I find the remote login password on my desktop computer?
1
638
Athena |