All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
MIDI I/O for ARC: send/receive notes, run per-note scripts, control PC or external instruments, with panic to stop stuck notes.
Featured
Convert a Caterpillar toy with EZ-Bot: install continuous servos for treads, hot-glue servo horns and route cables for compact drive.
question
Shaking And Confusing Rotationservos Makes Me Grazy
I bought 4 brandnew rotationserver. One starts at 90 and is only 90 mobile. Even when creating a servo profile -90 it is only 90 usable. Another starts to shake after 2 minutes. It shakes back and forth between 30 and 90 . I tried different pin. The servoprofil is ok. 2 Servo function properly. I have make the lessons about servo and servoprofiles....
11
4 k
Stiko |
question
Power Supply For Jd
First, apologize for my english. I want to run my robot without battery. Has ever tried someone? Can an adapter be tinkered and connected to a universal power supply? If someone has already built, I would look over pictures. thank you
12
4 k
Stiko |
question
A Tiny Question
Yesterday I received my IoTiny's(3), after testing all of them I noticed that the first one didn't make the start up sound, however I was able to connect to it via the web client. But after...
27
5 k
budel0 |
robot
Alsaqri's Making An Elevator Of Many Lev
Build a multi-level elevator with automated doors at each floor, a hands-on educational project for students learning electronics and mechanics.
0
2 k
alsaqri |
question
Inmoov And Synthiam
A thread for using EZ-Robot for Inmoov control so we don't have to keep hijacking other threads.
141
20 k
WilliamK |
question
Cereproc Voices
I was out to the Cereproc website earlier and they have all their voices on sale 50% off. If you are looking to give your robot another voice, now is the time to buy.
2
3 k
JustinRatliff |
question
B9 Robot
hi, i just brought a full sized b9 robot(from the tv show lost in space)..and had it shipped to me .all the internals were damaged.i have a limited working knowledge of robots however this project to rebuild it might be a problem for me.i have tried the b9 builders club with no luck.i just keep getting passed from person to person.does anyone have...
6
3 k
Dave Schulpius |
question
Dslr Camera Trigger
Hi! This is my first post here! I have built a robot before using the arduino, but now really want to make something useful. As you can see in the video, my last robot didn't really...
54
7 k
Quantumsheep |
question
Sourcing Mini Usb Cam
Hey there I'm looking for suggestions for a usb 1080p 30fps web cam and lens as small as the one sold here at store for the EZB with similar lens size. I've looked around and...
4
3 k
fxrtst |
question
Jerky Servos
I have constructed my version of jd robot using EzB-v4 ,7.4v Lipo and hi torque 7.4v servos. Works well but the servos are jerky. They work fine individually. Any ideas? confused
9
3 k
westies |
question
Iotiny Used In A Real Project (Inmoov)
Just a quick picture (so not much to see) of my new inMoov utilizing the ioTiny in his arm(s).... More later... @DJ hopefully you'll keep the...
10
4 k
cem |
question
Continuous Servo Movement Panel
I plugged in 2 continuos rotation servos to my ezb one in D0 the other in D11 and selected continuos rotation movement panel while configuring i clicked on...
31
7 k
Mohamed.r |