All Community Content

Ez Lipo Balancer/Charger

since I had quite a severe Lipo battery explosion a few weeks ago that nearly set my place on fire,due to my lack of understanding charging modern battery packs. I have made it my mission to research everything about all battery types Nickel cadium,Nimh high power and Lipo high power. I do have a few older nickel battery packs that I have re...

Ezb-Rad Robot Ready For Field Investigating All By Itself

Absolutely thrilled at how easy it is to program the paranormal self-investigating project Rad robot using the EZB-4 system . All I can say is for the small cost of the EZB computer and an old 1990 toy robot bought for a few dollars at a flee market,this is amazing guys! thank you so much for developing this system! i am ready for actual out door...

Ez-B Battery

Hello DJ Sures, Me again, I just had a quick question about what batteries you can use with the EZ-B. Can you use any Li-Po battery aslong as it is under 9v? If so, what would you suggest? Thanks, Joshua

Replacing Servos In Jd's Foot

I'm upgrading the servos in JD's feet to HDD and I think I remember seeing detailed step by step instructions on how to replace the servos.... but after extensive searching I can't find them Any idea if such instructions exist? Thanks, Frank

Feature Request - Invert Option On Auto Position Screen

As a newbie I have been playing around with a lot of different frames/actions to get used to the auto position control. I kept getting confused on the direction the servo was moving, espicially when SIX was not connected. To make it easier I changed the servo orientation so when I increase the servo value it would always move the servo forward or...

Led Battery Charging Test

Hi everybody, Could someone help me with this bac to basics trick which should allow me to connect an LED to the leads which connect to the battery charger when my robot docks so, when charging current is running through, the LED lights up? I wish to do this without using any controller so no ADC port, no HIGH/LOW digital port, just an LED and...

Change Colour From Rolli

Sometimes I see robots of EZ in other colors. What is the best way to change the color? I thought of paint spray or foil? I thought I was waiting for your experiences. The head of JD makes me most worried. I have to take care of my eyes. How did you do that?

Iotiny And Dynamixel

How can the ioTiny be used to drive a Dynamixel AX-12 servo chain? I wrote an init script UARTInit(0,5,11500) and got: Error on line 1: UART port is @ 0, 1, or 2. If only pins 0,1,or 3 on the Tiny can be used as a UART can the Dynamixel plugin be expanded to include a UART pin choice?