All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Map Myo armband gestures and accelerometer to servos and ARC scripts for arm-mimic control; supports multiple armbands.
Featured
Vincent robot using Iotiny and Raspberry Pi to run an EKG video on a chest LCD; monitor is bad and awaiting replacement.
question
Speech Recognition Going Into Pause Mode
Hi all...please forgive me if this topic has been raised previously. I am using the mp3trigger and I have found the speech recognition module is going into pause mode for no obvious reason. I want to keep the speech recognition active to receive more commands rather than having it pause and not respond. Any thoughts? Martin
1
2 k
MovieMaker |
question
Using A Hs-785Hb Winch Servo Motor With Ezb Servo Control?
Has any one used the above with ARC's servo controls? The servo rotates a full 3.5 turns so I was...
1
3 k
y49x117 |
question
Ar Drone Landing On A Moving Target
Hello. I am currently trying to make my Ar Drone track a moving a coloured object with the bottom camera and then land on it. How would this be...
17
4 k
abdullah1 |
question
Ezb Windows Software
I saw there is a 2017-3-20 new release of ezb software, but it requires win 8-1 or more. I use with my robots an old pc with win 7 and an old release of ezb software. Will the win 8-1 version work for me ? Can I get somewhere the last release available for win 7 ?
3
3 k
thetechguru |
question
Power To Dodecagon Shell
Hello, In a nutshell, my question is how to connect a LiPo battery to an EZ-B v4/2 WiFi Robot Controller mounted on a Dodecagon shell. I'm building a robot dog treat tosser...
6
2 k
Dunning-Kruger |
question
Humanoid Robot 90Cm Height
Hi all I am interested to buy/build a robot for a personal project. I am looking for a humanoid robot that I am able to program it with the following specs. 1. Two legs and can walk (>10 cm/s) 2. Carry something (If I ordered it to grab something) (<1 kg item, and walk in flat surface, not flat surfaces,or stairs) (Can pickup anything <1kg...
2
3 k
ajak |
question
ARC On Microsoft Surface Book
I have a microsoft surface book with windows 10 professional. Finally made the switch from windows 7. I have read the threads on display issues with windows 10. I have the screen resolution set to 1920 x 1080 with a text size of 125. Everything displays in one screen without having to scroll left or right. Text displays fine but is a bit small....
1
2 k
DJ Sures |
blog
Microsoft Archi Robot Hack Highlights
Retro Omnibot 2000, Microsoft MACH (Microsoft Academy College Hires), AI and EZ-Robot converge in robotics innovation and education.
0
739
question
Joystick Pad Scripts
I'm looking at the mobile app for SIX and can't figure out the connection between the joystick pad (on left) and the movement it triggers. I also have 7 script controls in the...
2
2 k
jmp23834 |
question
Ultrasonic Radar Servo
I am using an ultrasonic radar plugin with my omnibot and the sensor works well however the sweep of the servo is extremely slow . The servo is an EZ 180 one. Cannot see any way to increase the sweep speed. Be grateful for any suggestions.
3
3 k
Dunning-Kruger |
question
New Hdd Servos
received 10 new HDD servos and just had a chance to try them out, all I can say is "WOW" these things are frickin awesome, absolutely zero holding noise and generally quieter over all Well done DJ, you really have out done yourself with these new servos on a side note regarding shipping, for 10 servos I was quoted and charged for a...
3
3 k
Mickey666Maus |
question
How To Connect To Client Mode ?
I can not connect to client mode. I have connected to ap mode, rebooted and all is ok. I then go back to set the ezb to client mode and it comes back and says it could not connect. I have entered the ssid and security key being carefull of the caps and spelling. The firewall was shut down and I have researched all the community videos. If I click...
4
3 k
geosmith41 |