All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
XInput joystick skill for ARC: maps Xbox controllers to movement, servos, triggers, vibration, variables; supports analog inputs and scripts.
Featured
Animate a snowman with ARC and an EZ-B controller using webcam motion tracking, servos and voice recognition for interactive neighborhood fun.
robot
Mrs's My Robot Would Be A Willing Te
Make your robot a willing test subject for student projects, enabling creative prototypes and hands-on learning
0
2 k
Mrs. Rempel |
release
Release 2017.11.13.00
Fixes EZ-B v4.x/2 crash from UART packets >2048 bytes; requires firmware 2017.11.13.00+ (use v4 updater). Faster project loading via control buffering.
4
4 k
ptp |
question
Ez-B V4 Magic Smoke
Hi, I bought a DIY kit from Hobbyking. I planned to buy a EZ-Robot kit for a while and for that price, I could not resist any longer. I had my doubts if it was really a genuine kit, but everything looked legit. I build a small two wheeled robot with it to get familiar with ARC etc. I provide power to the EZ-B V4 with a 2s lipo. Everything was...
3
3 k
Jeremie |
question
Import/ Export Utilities Troubleshoot
Dear EZ-Robot Friends :-) I want to use the Import/ Export Utilities for the Auto-Position. I use Windows 10, installed the newest ARC. The problem: I can produce an Export-File (Servo Profile Auto Position) but If I import this Data, all is fully visible but nothing is working and there comes a error message: Auto Position Thread Error:...
1
3 k
Smarty |
question
Connectivity
I am trying to get technical support for my ez bot robots. Technical support sends me online. I have been online trying to figure this out but no luck. I have JD , six, and revolution. I can not get JD to connect to Wifi. I have uninstalled the antivirus software as suggested, have rebooted, their is no red light shown? on the power pack. my voice...
3
2 k
DJ Sures |
question
Is Bing Speech Rec Still Free?
I received an email saying my azure account has been cancelled unless I pay after the trial period has ended. The plugin has stopped working for me. I thought this was a free service if you kept under a cap or something which I definitely have. Anyone else experiencing this?
9
3 k
Perry_S |
robot
DJ's Apple Watch Robot Control
Synthiam ARC adds Apple Watch support to the ARC iOS app, making the watch more useful and fun for ARC users.
12
11 k
DJ Sures |
question
Reading Values From Imu Mpu6050 6Dof
Hello everyone, I had been trying for some time now and have finally come up with a code for taking values from the IMU. @DJ here it goes; I would...
15
10 k
thetechguru |
question
Inmoov Battery Question
Hello fellow Ez-Robot Users, I am in need of some help, I have been building my Inmoov for several months when I have the time and came across this issue. I first had a e-fuel power supply 12v at 30a which I found out very quickly that it was too powerful to power my ezb4's (two that I have). I now have a 6v 50a power supply. When I connect to the...
14
5 k
cem |
question
Servo Movement At Power Up Before Initialization
When running my servo initialization in the connection script I am able to set position and speed just fine. I noticed that...
25
17 k
Dave Schulpius |
question
Setting Servo Speed For An Auto Position
Hello everyone. I am looking for some scripting help. I would like to set a servo speed, or even better, an incremental servo speed to all the servos in the auto position selections I use in a script. Instead of adjust speed for each servo individually. Is this possible? I am using 2 auto positions from 2 boards. The reason I would like this is...
8
3 k
3dGuy |
question
Mobile Connection Init Script?
In the desktop connection control I have set the initial position and speed for servos in a connection script But, in the mobile interface I don’t see a way to do this in the connection control Anyone have an idea of how to have a script run upon connection on a mobile device? Thanks, Frank
1
3 k
DJ Sures |