All Community Content

Haywire Servos When First Using Bv4113?

I noticed an unusual reoccuring glitch while I played with the BV4113 last night. For some reason, the servos attached to D1 and D2 would go crazy the first time I did anything with the BV4113 (which was connected to D0). The problem would go away after I moved the D1 and D2 servos but reappear each time I rebooted the EZ-B but only during the...

Axlon Andy Robot

Someone HAS to get this and turn it into an EZ-Robot... UNREAL! www.ebay.com/itm/Axlon-Andy-Robot-Rare-Topo-Head-Androbot-Pedigree-Vintage-Computer-Atari-800-/110773099146?_trksid=p4012.m1374&_trkparms=algo%3DPI.WATCH%26its%3DC%252BS%26itu%3DUCC%26otn%3D8%26ps%3D63%26clkid%3D4223645895891923578

Saved Project - Blinking Light

Hello all, I have saved and reopened a project before but now I reopened it today and I get the tiny blinking light on top of the EZ-B. The big light in the corner is "on" and working but the little tiny light on top is blinking steady and functions like servo commands or mp3 trigger seems to be "inactivated". How can I fix...

Save Button On Voice Synthesis Config

Hey all, I have been playing with the Soundboard and Text to Speech (TTS) (Voice Synthesis). Both awesome ARC tools! I have noticed that there is now a config setting for the voice synthesis that allows for change to male female child voice etc. I cannot figure out how to save the configuration however. Looks like there may be a SAVE button...

Using Roomba Motors And Maybe Wheels?

Hello all, i previously asked another member about the tracks on rad 2.0 he indicated that it could probably pull the robot but motors may not last. My idea hear is probably replace the motors. I have a omnibot 2000 on the way and im looking for a good alternative to the loud 1984 motors in the omnibot. Roombas wieght 6.5 pounds , so 4 roomba...

Movement Script For Bv4113 H-Bridge

I have a small bi-ped robot with a separate dc motor in each foot and the BV4113 controlling the two motors. I'm trying to configure the Movement Script so that the FORWARD command alternates short bursts to each foot to mimic walking. Is there an easy way to do this?

Http Server

Hi All, I'm having a problem with the HTTP server control. When I click on start I get the error "The specified TCP port for this web service is in use by another application" I found that it was due to SKYPE running on my laptop. I'm assuming that it is the port 80 that is the conflict. Does anyone use a different port and how do you use...

El Wire

Can I hook up EL Wire directly to the EZ-B or do I need to use the inverter provided with the EL Wire and just power it from the EZ-B?

Would This Work?

I usually run my ez- b controller off of a 7.2v 3 amp rc battery with about 6 Servos running along with it, with no problems. But I like to use a werker 12v 12ah agm battery from the ez- b controller to run the sabertooth 2x15 which run 2 12v dc reversible gearhead motors 160rpms( is powered by 2 12v batterys), a 12v lighting system,a mp3...