All Community Content

Upgrading Firmware

Hi All - I'm hoping someone can help me out. I'm trying to update the firmware on my new e-z robot. I watched and read through the "getting started" tutorials, and I've searched existing forum posts but can't seem to solve my problem. Details are: 1) I originally tried to connect to my home pc (xp sp3) with a Bluetooth usb adapter that I...

Orugas Donde Puede Conseguirlo

donde podria conseguir orugas para tanque pesado y motores dc ? un saludo desde asturias

Sata To Sd Drive Converter Questions.

I have just ordered a Sata to SD drive converter for my mini itx board and had a couple of questions for those out there that have gone this route. The converter can handle up to a 32gb card (which I also ordered), I feel this is plenty for the OS, EZ Robot software and my sound files, any input here? I should be able to run Windows 7 on these...

Emotions With Auto Position

I was poking around in the examples folder and opening them one by one to become morez edjamakayted. I found something that startled me a little. Take a look under the auto position config tab, lol I instinctively looked at my webcam to see if the light was on! lol

Step-Down Voltage Regulator Gets You 3.3V Dc

Hey folks. Just ordered a few of these: AMS1117-3.3 Step-Down Voltage Regulator Adapter with 3.3V DC output. And they are easy to install and use; and also have Low power consumption. Power In: 4.5--7V DC Power Out: 3.3V DC with Max 800 mA Current. They are good for those applications where you need to get 3.3 volts to "something". In my...

Teneis Motores Dc Electricos

estoy pensando utilizar motores dc pero mi duda es que si funciona con la placa q teneis y con el programa ARC

Motores Dc Funcionaria Con La Placa 2,5 Amp Motor Controller

la duda tengo si los motores dc de 12 vatios funcionara con la placa 2,5 Amp Motor Controller .donde podria conseguir motores dc?

Autoconnect Script, With Virtualrobot (And Digital)

Hi, Just to report a strange behavior with VirtualRobot in ARC: When I add a Digital (Input or Outpout) to the VirtualRobot, then the autoconnect script (ControlCommand("Connection", Connect0)) don't work anymore and connection failed, without any error message. Manual connection in the "Connection" window is OK. I have tested...

Donde Puedo Conseguir Materiales Para Hacer Una Estrucutura Robotica

soy nuevo aqui y soy fanatico d elos robot y me gustaria donde podria conseguir material para robot un saludo