-636459989693042832.jpg)
-636459989943960739.jpg)
-636459990485479714.jpg)
-636459980560649389.jpg)
-636459975718038038.jpg)
-636459969210457653.jpg)
-636459967995726605.jpg)
-636459970865108143.jpg)
-636465120384538626.jpg)
-636465113490053830.jpg)
-636475595612490698.jpg)
Here is the current look of this project, Super cool update, magpi magazine wants to feature this build with steps how it was done , !
By jstarne1
— Last update
Other robots from Synthiam community
DJ's Scarab Creepy Robot
Some people say this is creepy... Others think hes cute. You be the judge This was a remote control toy called the...
Bookmaker's Bustercomesto Life
I received my second EZ-B and everything is working great with few exceptions which DJ is looking into. Excuse my poor...
Bhouston's Inmoov's Sensors
Thanks Rich, Richard R, and Luis for helping me with the scripting to get these sensors working.
Ok tiny update after the rear tires had all night to cure , they look pretty good. Not as good as a spray application, but good enough. Once there is wear they will blend right in. I did several thick coats with a toothbrush. Pictures later when they are assembled.
Hey very cool Bot,following your progress! I did something similar but less tech than yours just using the modified rad Robot last summer. The main problem I had outside at night was the un- even terrain ,if the bot saw tall grass or was going down hill the Ultrasonic sensors would think it was looking at a wall,back up and turn instead of going straight ahead,so the sensors need to actually be mounted much higher up out doors but indoors it had no problems on even surfaces.
Refurbished rear wheels , coated in thick rubber
Hub caps painted to match because reasons
@ roborad , yeah uneven terrain will be a challenge , I think it has enough ground clearance, power and grip to move freely though. Thanks!
This is kind of exciting! Tonight is the first full night Watchdog will have to himself. Here are some camera views. He will not be navigating only idle and recording.Dont worry - Fire extinguishers are nearby!
90 percent full battery voltage
Nothing Is screwed down in case I need to quickly unplug anything
Forward view 800x600
Left view 800x600
Right view 800 x 600
Pardon the mess this is also the play room.
For today I am using the batteries from Nom Nom the mower. They are 2 x U1-3 lawn and garden lead acid batteries . 425 cca
The future batteries will be power sonic 12350 12v 35 AH SLA AGM non spillable.
He celebrated by climbing on top and demanding a ride around the room , NOPE mom would kill me.
And you said no? What happens in the robot lab, stays in the robot lab!