cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Other robots from Synthiam community
Johnnypipey's Bb8 On The Cheap Project
Hi This is my first Real EZ robotics project (other than just playing around with the system) Aiming to recreate BB8...
Smarty's Ez-Robot Halloween Witch Esmeralda
one of my projects: Named: Esmeralda The Witch! A new designt PROP, better looking and new colored. PIR-Sensors,...
Ptp's Ezb V4 Custom Firmware V2
Hello everyone, I would like to share the new custom firmware available for EZB 4. Currently im beta testing the...
Check this out for omnibots claw center. http://www.ebay.com/itm/Belt-Clip-On-Plasma-Sensor-Disk-Luminglas-Light-Circle-/180639982470?pt=LH_DefaultDomain_0&var=&hash=item6fc39573ab
I am going to put a 6" version in the chest of my big bot.
This could even be cool as the eyes, and it responds to sound.
@jstarne1, Wow you are moving out on the gear! Glad you are going for a screen. I hope I am not bearing bad news, but it looks like that screen may not work directly with your MOBO. Your MOBO has DVI and HDMI out and the screen on ebay is NTSC/PAL which will no work without conversion. Converters, while not super expensive, will take room and power... and you are going to loose resolution with that too. If you already bought it, you can still use it....may be a bit tough to fit everything in your bot. I hope this is not too bad of news for you. I will see if I can find some DVI screens which would absolutely rock at a decent price.......
@Bret That circle thing is trippin'. I think i just found a centerpiece for Legion...if you don't mind me stealing your idea shamelessly!
v/r
Kevin
Ok I've descided the vacuum unit will be a seperate unit that attaches to the back , but power head built in is what I'm thinking. That way it can be removed easily anytime. Just a thought there. Also I believe ill do eyes with either el film behind some plexi or just frosted Plexiglas side lit with LEDs. I was thinking " what would Tony Starks personal robot look like , his personal flashlight and screw holder , what a bot might look like rolling around his shop.
Go for it Kevin, I think it will fit quite nicely in Legion's chest. They also have them in rainbow colors and other single colors. But I liked the blue and the green ones best.
@kevin board has a "tv out" with is regular RCA video connection.... It's standard definition but on a 4 inch screen no one cares.
. This really is a perfect board to do this project with ...
whew....good good! It looked like SPDIF coaxial audio ..... in the pic above or was that your old board? Whats the model of your new one........I am taking notes...
@kevin. Ok I lied , its not a video out ,wooops! Not the end of the world though because I can grab a video card that has a tv out or somthing else that will produce the standard video signal. From what I understand there's a dvi to composite adapter for 30 t0 40 , I think I would rather invest that money into a suitable video card. Anyways its cool everything's been super smooth in this project so I'm happy !
I was able to salvage a lefty motorized arm from another Omnibot 2000! Woohoo with two potential motorized arms now I'm more concerned about getting good head movements. I need left/right turning , side to side tilting , and looking up and down. The tilting to the side with the head would be a great reflex after recieving a voice command , or if the bot didn't recognise a command as if he's thinking about it. Any ideas or info for setting up neck movements let me know !