I am using ARC software with 2 iotinys controller, 2 EzB4 controllers - 3 EZ-ROBOT 1300 lithium batteries for the four Ez 360 HDD servos for the two arms, two 996R servos for the grippers, 2 DFRobot rotation hex bases for head movement and body movements. with 2 EZ-robot servos HDD, 2 RGB for the eyes - EZ-Robot HDD servo and moving camera - still need a mouth
from servo City: 4 gearboxes , channels, parts, extensions, Prowler Robot Kit (wheels, 4 motors, h-bridge pwm motor controller
Here is a sample video
EzAng
By EzAng
— Last update
Other robots from Synthiam community
Ezang's Motion Detector
Control AM312 mini PIR motion sensor with ARC serial monitor and Arduino - DC2.7-12V, 3-5m range, 100 angle, low...
Jeremie's Optimus Prime
Optimus Prime bipedal robot build using EZ-B, Arduino sound shield, LiPo battery and Gundam parts for aesthetics and...
Cambot1's My Name Is Cameron, This Is My First Robot 6
Homemade robot built by a 10-year-old and grandpa, programmed with custom scripts, learning robotics and sharing...
you can use any micro servo but I prefer metal gear servos , they are stronger less jerky,
Here's my EZ camera version of the inmoov eye socket. I used double sided tape to mount the actual camera board that has to be taken out of the EZRobot plastic case. I used some standard micro servos, imagine the EZ servo would work but not 100% sure.
https://www.thingiverse.com/thing:2479390
The rest of the eye parts and a tutorial on how to assemble them can be found directly on the inmoov website
hi perry
do you have the rest also? from the eyes.
See you guys Monday, the 21st
EzAng
Read my comment above nomad, all the other files are on the inmoov website. Assembly tutorial is there as well.
hi perry/ezang
inmoov has a new wib site.
inmoov new web site
here you find the video's how to do.
cool video about the eyes from inmoov.Hi guys, 3d printing in on the agender this week, your conversations above me.
I ordered again on Amazon the Creality 3D Printer CR-10S Pro V2 with BL Touch Auto-Level, Touch Screen, Large Build Volume 3D Printer 300mmx300mmx400mm with Capricorn PTFE 2019 Newest 95% Pre-Assembled Printer
We will see what happens - starting Monday
EzAng
I have that printer. You will like it a lot.