I am using ARC software with 2 iotinys controller, 2 EzB4 controllers - 3 EZ-ROBOT 1300 lithium batteries for the four Ez 360 HDD servos for the two arms, two 996R servos for the grippers, 2 DFRobot rotation hex bases for head movement and body movements. with 2 EZ-robot servos HDD, 2 RGB for the eyes - EZ-Robot HDD servo and moving camera - still need a mouth
from servo City: 4 gearboxes , channels, parts, extensions, Prowler Robot Kit (wheels, 4 motors, h-bridge pwm motor controller
Here is a sample video
EzAng
By EzAng
— Last update
Other robots from Synthiam community
David's C3po Ez Robot
Build a C-3PO robot with an EZ-Robot brain and servos, adding hearing, vision, speech, motion and interactive...
Kenny's Humanoid #2
15 DOF humanoid robot built from a budget eBay kit using MG995 servos, EZ-B head control and Castle 10A regulator; power...
Marv's 4Wd Project
Control a 4WD with EZ-B and Sabertooth via Synthiam ARC: serial H-bridge tuning, camera/Bluetooth plans, ultrasonic and...
here some more pics.first try out 2 micro servo and two led.
very nice, LED eye balls, lol
I think I will make some later today
EzAng
you need to put a camera in one eye
ok, I will try later
EzAng
hi nallycat
i know.but i prefer the camera on top the head. any idea where these stl are?
back plates of the eyes are missing.
inmoov
if you are using Ex-robot camera you can get the camera mount for the eyes in thingiverse the camera in the eye make tracking very easy and smoother.
nallycat
found the ez robot cam for inmoove. are these ez robot servo's?
Nomad, thanks for the inmoov files try next week
EzAng