I am using ARC software with 2 iotinys controller, 2 EzB4 controllers - 3 EZ-ROBOT 1300 lithium batteries for the four Ez 360 HDD servos for the two arms, two 996R servos for the grippers, 2 DFRobot rotation hex bases for head movement and body movements. with 2 EZ-robot servos HDD, 2 RGB for the eyes - EZ-Robot HDD servo and moving camera - still need a mouth
from servo City: 4 gearboxes , channels, parts, extensions, Prowler Robot Kit (wheels, 4 motors, h-bridge pwm motor controller
Here is a sample video
EzAng
By EzAng
— Last update
Other robots from Synthiam community
Robohappy's Adventurebot4wd
Decided to give the robot a little boost, so im gonna do some reconfiguring. First up, Ive decided to give it sorta a 4...
Buratino's Buratino - Humanoid Animatronic
Buratino: 3d printed - 50x50cm humanoid robot with 23 axis of movement (full of heavy torque servos). (Arms - torso-...
Fxrtst's Introducing Alan
Edit: Kickstarter campaign failed in 2015. Starting in 2025 you can build an interactive Alan by joining my Robotics...
Well good morning on Sept. 14, 2020
How is everyone?
I brought back Mr. Metal for a while...
I have been help people connect to ARC by simply shutting off their anti- virus first then checking their firewalls...
Last week I helped with AIML bot and Pandora Bot with Bing speech questions:
I don't know what I am going to get into yet, I want to learn something.
Be well all,
EzAng
hi ezang
how about your printing skills?
any pics off what youve printed?
lol, I have not got into 3d printing yet, maybe tomorrow
any pointers of instruction?
Also thanks Justin for viewing
Your community post was liked by 'JustinRatliff'.
EzAng
print the excample on the sd card.
ok I will a little later, thanks
EzAng
EzAng,
If you want something to 3d print, I found this...
https://www.thingiverse.com/thing:3375744
I printed these out for use with on the Actobotics metal parts.
ok I will check, thanks
EzAng
Another day, Wed. 9/16/2020
I have been playing around with the sound board (PC) and the sound board v4 with the speech recognition control, with the java commands - works well.
what are you all up too?
still have not got to 3d printing - maybe I will dedicate next week to this...
Be well all, EzAng