Robot Building Questions
Synthiam Credit
Log In
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Synthiam Swag
See All Swag
Robot Sticker
Recent Robot Skills
View All
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
MIDI I/O for ARC: send/receive notes, run per-note scripts, control PC or external instruments, with panic to stop stuck notes.
Featured
Convert a vintage 1984 Radio Shack Robie into a Roomba-mounted retro cleaning robot with ez-b, camera, and custom arms.
question
Robosapien Connection Question
My board is a different version than your's and doesn't have a solder place that says IR, it has one that says VRE and Out1. I've included and photo of the...
11
3 k
Lumpy |
question
Vk-162 Gps Module
The actual pinout assignments for this device are shown in the next to last image posted.
7
8 k
Robot Doc |
question
Looking For More Heavy Duty Motors
I have been working on a couple different toy robot conversions but would also like to start on a household robot that will actually do some useful...
12
4 k
Dave Schulpius |
question
Need Clear Image Of Back Side Of The Ez-B
hi dj i would like to see a clear HD image of ezb of top and bottom of the board just being curious
1
2 k
PJ_Dtechy |
question
Mini Itx Motherboards
I'm wondering if people know much about these mini motherboards. I recently read this https://synthiam.com/Tutorials/Hardware.aspx?id=19 and this appears to be ideally suited for my needs. Although I don't know much about them. Heres what I'd like to know about them: . can they be powered from a battery of some kind . can software written on c# be...
3
2 k
Jaychadw |
question
Gps Helppp!
Hello Everybody! I want to add a gps module to a robot I am building for a school project. If anyone could please let me know of GPS modules that are compatable with the EZ-B v3? Thanks again!
6
3 k
CardboardHacke… |
question
Using The Bv4113 Without A Movement Panel?
When I purchased my EZ-B kit last year, I also bought the BV4113 H-Bridge that EZ-Robot was selling at the time. I now want to use it to control the wrist and grip motors in a robotic hand that I got in an equipment trade from Josh. I found a datasheet and sample code here https://doc.byvac.com/index.php5?title=Product_BV4113 that shows I should be...
4
3 k
thetechguru |
question
Ez-B Control Power Pins Above D14
There are a couple of pins above D14 on the EZ-B Controller If I have the batteries plugged into the power port can I also plug power onto these pins as well. What are the requirements? What is the best way to use them? What is the primary purpose for these extra power pins?
2
2 k
slim6072 |
question
Ultrasonic Sensor Spacing To Change Blind Zone
I already need to solder leads to a ultrasonic sender and receiver pairs. This is due to limited space inside the Omnibot 2000...
4
3 k
Rich |
question
Ar-Drone And Ez-B
Anyone else having connection problems with the Parrot Drone and EZ-B. I actually had my unit at DJ's and it would fly from the EZ-B but the camera would not colour track. DJ rewrote the...
11
4 k
thetechguru |
question
Better Servos
Is it possible to use AX-12A Professional Robot servos with the EZ-Robot kit? I'm making a are out to test some ideas and the servos that came with my bot kit are not strong enough. I want to...
26
8 k
jstarne1 |
question
Greedy Robot Arm Video
I thought this.is.useful for grabbing a beer but it didn't say how it worked or what sensors used. Could You direct me to what sensors to buy to utilize this feature?
14
4 k
thetechguru |