Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory, drives, and multi-step autonomous tasks.
Featured
New Arduino creation Mr. Roman features moving eyes and mouth, with more enhancements coming.
question
Omnibot 2000 Dimensions
Now that pranav(I think that's how it's spelt) has got me inspired by his foam board omnibot build I want to try to take it farther. To do this I need the...
10
5 k
CardboardHacke… |
question
Horizontal/Vertical Servo Control
I ran into this once before and never did figure out exactly how I got it working. When I add either a vertical or horizontal servo control, I don't get a...
10
4 k
Rich |
question
New Store Items Update?
There has been a few items talked about that have yet to be further commented on. Mainly, the 5v single port regulator that was mentioned by skater_j10. Any further comments? When will it be available? Anything else that you have questions on can be posted.
0
2 k
CardboardHacke… |
question
Question On Wirings Of The Modified Omnibot2000.
Ok, here is what I finally came up with. Please give me feedback: I start off with 12vdc which goes to the switch and base....
14
4 k
Rich |
question
ARC External Interface
Hi all, I love what DJ has done with ARC and all the enhancements that have been made and continue to be made. Having the SDKs are awesome but I really like what DJ has already...
11
7 k
MovieMaker |
question
Digital Ports On New Ezb 4.0
Will I be able to plug the Servos Directly into these port without a voltage regulator? Can I use my old PING from EZB directly with the new board without voltage regulator? If I need a regulator should I use a 11.1V Battery and turn it down to 5V
11
4 k
Jeremie |
question
Still No Delivery
Placed my order on June 19th 2013 and have still not recieved my order! have emailed and had no reply! to say that I am unimpressed would be an understatement! Any clue as to when I might get the parts that I ordered? confused
7
2 k
Jason |
question
Multiple H-Bridges On A Single Project
Hi All So apparently the only way to use multiple H-Bridges on a single robot in is to create multiple project widows? Correct? When I attempt to add a second H-Bridge I get the message one H-Bridge per project. Thanks, Daniel
4
2 k
Mulberry |
question
Ping Sensor Help
I am having a problem with the ping sensor. I have the sensor hooked up to D8 and D9. I have servos and an H Bridge connected but not doing anything with them. I am using the ping distance control to view the result and they seem very unstable. With a stationary target the reading are bounce between 16 to 18 (which is probably an accurate value and...
4
2 k
glenrswanson |
question
Hello, Newbie From Leeds
Hi there, Really just an introduction, as my printer has not arrived. (I go to pick it up in an hour or so, so quite excited) I have however, thought it would be a good idea to join a 3d printing forum as I have never done this myself. All previous rapid prototyping has been done by professionals..... So, I am getting a Makerbot 1(Clone) dual...
7
2 k
PhilW |
question
Help With Sensor
Hello such, anyone have an example of how to work the sensor programmed in C# or is in any SDK sample? I hope your help. regards
5
2 k
Rich |
question
Common Ground And Pololu H Bridge
Morning All So I'm using a Pololu H bridge (VNH2Sp30) to control a 12 volt motor and having trouble with my common ground. I ran a connection from the...
3
3 k
jstarne1 |